Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ccc bench wake up
29-12-2018, 23:51 PM,
Post: #1
ccc bench wake up
I have ccc+cid+con and usb>can interface.
What exactly it has to receive to wake up and to stay active all these units? Only 0x130 with 100ms or some others as well?
Quote this message in a reply
30-12-2018, 11:43 AM,
Post: #2
RE: ccc bench wake up
Question - to get cid working, do i need some other modules?
Because when units are starting i see backlight of CID turns on for 1sec and goes off.
Quote this message in a reply
05-01-2019, 19:34 PM,
Post: #3
RE: ccc bench wake up
(30-12-2018, 11:43 AM)zero9 Wrote:  Question - to get cid working, do i need some other modules?
Because when units are starting i see backlight of CID turns on for 1sec and goes off.
you need cas modulo and Key. try out with a E65 CAs, it has the key included
Quote this message in a reply
11-01-2019, 17:52 PM,
Post: #4
RE: ccc bench wake up
You can try this :
id = 0x12F, len = 8, data = 8C 50 8A DD F4 5 30 6 each 100MS
Quote this message in a reply
12-01-2019, 17:31 PM,
Post: #5
XZBMW  RE: ccc bench wake up
(11-01-2019, 17:52 PM)ashrafpts Wrote:  You can try this :
id = 0x12F, len = 8, data = 8C 50 8A DD F4 5 30 6 each 100MS

Hi ashrafpts, do you know also the message to wakeup CHAMP2?

I used the one for NBT and this your for CIC, but no one seems able to wakeup my CHAMP2.

Thanks
Quote this message in a reply
15-01-2019, 16:21 PM,
Post: #6
RE: ccc bench wake up
try to use the 2 messages ( 0x130 & 0x12F ) at same time , as i know one message is to wakeup the module and the other one is to keep it live ( not to go to sleep mode )
Quote this message in a reply
06-02-2019, 06:12 AM,
Post: #7
RE: ccc bench wake up
Hi,

Do I need connect cid and con to work with CCC on bench?
I connect power and CAN Bus, I close MOST ring.

The only module that I can connect is gateway, rest show IFH-9 error.
I thing CCC is reseting because I hear from time to time CD drive.

But maybe I need to connect CID and Controler to work?

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
06-02-2019, 12:49 PM,
Post: #8
RE: ccc bench wake up
Hello i have normal bench without can emu and ccc wiring i too only can connect to gw, cant connect to another most modules where could be problem?
Quote this message in a reply
06-02-2019, 13:40 PM,
Post: #9
RE: ccc bench wake up
How you connect power to ccc?
I connect only:
12V - pin 15
Ground - pin 12.
What aboute pin 14 from LM? It's only for illuminating?

If I helped, please magic buttons thx+rep yes yes yes under under under
Quote this message in a reply
06-02-2019, 14:42 PM,
Post: #10
RE: ccc bench wake up
Yes its ilumination, everythibg conected +- can and most, my icom adapter blinks that with most everythibg good
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Tool for bench read 8hp Garryq 9 1,572 26-03-2024, 09:32 AM
Last Post: skywoker
  Bosch MEVD172H bench backup mrproper 1 249 23-03-2024, 18:43 PM
Last Post: Ratnik1990
XZBMW ENAV2 bench activation Airbus 10 801 25-02-2024, 08:17 AM
Last Post: jb2005
  Motronic 3.3.1 bench jaramillo 3 174 13-02-2024, 05:12 AM
Last Post: 2013m5
  Dde Coding/flash with esys in bench? ruben_17non 0 183 08-02-2024, 21:28 PM
Last Post: ruben_17non
  Entrynav2 - Trying to Trigger Component Protection on Bench 2002JCW 5 465 30-01-2024, 16:44 PM
Last Post: DEJMIEN
XZBMW NBT display on bench without unit djordan 4 324 15-01-2024, 08:08 AM
Last Post: Powerlab
XZBMW cas / cluster bench setup Cniksor 103 23,845 09-01-2024, 09:43 AM
Last Post: MIKUr1
  Entrynav2 bench Jalami 1 298 06-01-2024, 15:28 PM
Last Post: Airbus
XZBMW ID8 bench CID can not light bbw 3 467 12-12-2023, 20:36 PM
Last Post: Airbus

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content