Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Smok UHDS Support/Feedback/Backup Thread
09-01-2019, 07:04 AM,
Post: #111
RE: Smok UHDS Support/Feedback/Backup Thread
OK. Thanks. Do you have a Suggestion for me? I only need a Tool for this Car. Just for Seat Ibiza 2014...
Quote this message in a reply
09-01-2019, 13:22 PM,
Post: #112
RE: Smok UHDS Support/Feedback/Backup Thread
yeah..find someone local who can do it for you
Quote this message in a reply
09-01-2019, 13:41 PM, (This post was last modified: 09-01-2019, 13:41 PM by Master_Heinrich.)
Post: #113
RE: Smok UHDS Support/Feedback/Backup Thread
I need this Service every Month for the Same Car. So a local man ist top expensive....
Quote this message in a reply
09-01-2019, 13:56 PM,
Post: #114
RE: Smok UHDS Support/Feedback/Backup Thread
check out obdstar tool, probably cheapest option for you
Quote this message in a reply
09-01-2019, 17:38 PM,
Post: #115
RE: Smok UHDS Support/Feedback/Backup Thread
I already bought a X300M. I get one error after the other. I have been in contact with the customer service of obd-star for two weeks already. Allegedly, my log files look at the technicians. But the tips I get do not really help me ....
Quote this message in a reply
10-01-2019, 12:38 PM,
Post: #116
RE: Smok UHDS Support/Feedback/Backup Thread
I got a SMOK UHDS, latest version, wanna read an Siemens MS5150(EMS2K)

I followed the Pinout and im not able to get a real connection/readout.
if i use this setup but just a normal DCAN Cable, im able to use BMW Inpa with it for example.
Already contacted SMOK but they are on holidays till the end of January.......

Someone have an idea?


Attached Files Thumbnail(s)
           
Quote this message in a reply
10-01-2019, 14:57 PM,
Post: #117
RE: Smok UHDS Support/Feedback/Backup Thread
(10-01-2019, 12:38 PM)blax123 Wrote:  I got a SMOK UHDS, latest version, wanna read an Siemens MS5150(EMS2K)

I followed the Pinout and im not able to get a real connection/readout.
if i use this setup but just a normal DCAN Cable, im able to use BMW Inpa with it for example.
Already contacted SMOK but they are on holidays till the end of January.......

Someone have an idea?

Have you tried Service mode before reading ?

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
10-01-2019, 15:00 PM,
Post: #118
RE: Smok UHDS Support/Feedback/Backup Thread
(10-01-2019, 14:57 PM)volavka Wrote:  
(10-01-2019, 12:38 PM)blax123 Wrote:  I got a SMOK UHDS, latest version, wanna read an Siemens MS5150(EMS2K)

I followed the Pinout and im not able to get a real connection/readout.
if i use this setup but just a normal DCAN Cable, im able to use BMW Inpa with it for example.
Already contacted SMOK but they are on holidays till the end of January.......

Someone have an idea?

Have you tried Service mode before reading ?

Picture 2 shows the Service Mode, it says:
Licence Accepted
Init Ok
Sec Acces I OK

But then a error:
Moot Mode Error !!!
Error !!!
Sesion Finished
Quote this message in a reply
14-01-2019, 14:13 PM,
Post: #119
RE: Smok UHDS Support/Feedback/Backup Thread
hi friends

who have file "manual_en_80.rtf" please , is MQB help buton

smok are holidays and i need it please 

thanks wink
Quote this message in a reply
23-01-2019, 15:02 PM, (This post was last modified: 23-01-2019, 15:02 PM by volavka.)
Post: #120
RE: Smok UHDS Support/Feedback/Backup Thread
Audi S Q5 2015
HW_87: 8R0920931G
SW_89: 0567
SN_sec: 03G31KC1H

wasting time no

Not work

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Orange5 Clone [Support/Feedback/Rework/Calculators] ROD-BENDERS 101 54,006 07-03-2024, 10:49 AM
Last Post: Kamardine
  Golf IV Motometer cluster backup with b58813(93c56) and 24c02, please? Yhoni 0 93 26-01-2024, 16:22 PM
Last Post: Yhoni
  MDFLASHER FEEDBACK - OPINIONS victorysatgr 2 212 07-01-2024, 19:26 PM
Last Post: donesko
0Dash IProg+ & IProgPro suppot/Feedback thread volavka 154 124,569 21-12-2023, 22:31 PM
Last Post: al70
0Dash X-tool suppot/Feedback/backup thread volavka 243 117,888 23-09-2023, 05:57 AM
Last Post: canisha
0Dash MTool Mileage Correction suppot/Feedback thread volavka 58 42,660 23-08-2023, 04:40 AM
Last Post: efgiar
  Solved ✔ Sprinter W906 Dash EZS Mileage correction support JorBo 2 797 04-04-2023, 19:31 PM
Last Post: JorBo
  Need backup IC suzuki grand vitara 93c86 kryspl 2 1,165 14-12-2022, 20:34 PM
Last Post: kryspl
PPeugeot Can anyone tell me or send me to a thread on how to correct Mileage of a Peugeot 406? tomay3000 6 2,355 18-10-2022, 07:50 AM
Last Post: Diagcar
0Dash Dashboard Flash Backup Files collection volavka 31 29,210 07-10-2022, 15:26 PM
Last Post: peetie43

Forum Jump:


Users browsing this thread:
4 Guest(s)

Return to TopReturn to Content