[Hacha3]

Hello, I need help to identify the maps. I have attached the original and a Winols project.

There are some who do not know what they are and I do not know if I have left any important.

First I will identify them, then I will correct the factors and the axes, and finally I will try to do the reprogramming.

Audi A6 2.5 TDI 150PS 1998 AFB

EDC15M ECU:

(356706/356707)
Bosch: 0 281 001 833
VAG: 4B0 907 401E
D41

Thank you so much.

Audi A6 2.5 TDI 150HP 0281001833 4B0907401E 356706-356707.rar
File Type:
Downloaded:	19 times
Size:	171.71 KB

[rs@chip]

here stage 1 alredy made you can use it or modify your way and use file for compare...

[Hacha3]

Hello.

I am learning and I would like to know what is the name of the maps that I have not identified to know what I am looking at.

And also if there are any more you should know.

025BC
04228
05534
05D2A

Thank you so much.

   

[DieselBoost]

Hi Pal, if you really want to learn, take a look at the link in my description.  
This ECU is a little different, with pump voltage maps, but you will find those out when you get there. 
Good luck

[Hacha3]

Hi Pal, if you really want to learn, take a look at the link in my description.  
This ECU is a little different, with pump voltage maps, but you will find those out when you get there. 
Good luck

Hello

I had seen the videos before, but those 4 maps I can not find in them.

The pump is vp44, and I believe, it does not have a voltage map, since the pump itself has been incorporated.

Thank you so much.

[Hacha3]

Hello, I already have identified all the maps to make a good stage 1, thanks to the partner who made it.

   

I have two issues that I have not resolved.

To close EGR by Hysteresis it is correct to do it in the way I show below.

Original
   

Modified
   

There is a map that modified the partner and I can not know what it is or how to re-scale the axes.
Thank you very much, if you think that any important map is missing, tell me to add it.

Original
   

Modified
   

A greeting.