[Penni]

Hello,

i want to change the cluster of my Audi A4 B6 into a S4 cluster.
I tried to read out the SKC (PIN) out of the cluster several times with VAG EEPROM Programmer.
Although i read the decrypted EEPROM file, software does not show me any more Information (especially no login Code).

Does anyone has an idea, if its possible to read out the login code out of the decrypted EEPROM file, or what i made wrong?

Thank you very much for your help.

[nek13]

Go to a car electronics workshop, and it will solve the problem.

[ltujustas]

You need enter to new mode (set immo 4) with vag eeprom programmer, than read eeprom. After you will get pin, mileage, vin.
RB4 will show pin, vin, cs and other immo data only through obd

[Penni]

You need enter to new mode (set immo 4) with vag eeprom programmer, than read eeprom. After you will get pin, mileage, vin.
RB4 will show pin, vin, cs and other immo data only through obd

I already set new mode but vag eeprom programmer does not show PIN etc.
New mode seems to be set correctly because i can Change milage.

Can you tell me whats wrong?

[ltujustas]

Try write other eeprom with same sw hw. If vag eeprom programmer will show data, probably your dump corrupted. If you have only vag eeprom programmer, than other solutions don't know for you. Becouse vag eeprom programmer not allways working well