Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DCM3.4 eeprom 95640 location
28-10-2016, 18:24 PM,
Post: #11
|
|||
|
|||
RE: DCM3.4 eeprom 95640 location
Yes mate it contain crc 100%...your car will start but probably with injection fault and wont let you program injectors..
![]() ![]() |
|||
Reputation: +2 - volavka [+2] | |||
11-04-2019, 20:03 PM,
Post: #12
|
|||
|
|||
RE: DCM3.4 eeprom 95640 location
Hi
Old thread... But possible to read that ecu with upa??? |
|||
11-04-2019, 21:25 PM,
Post: #13
|
|||
|
|||
RE: DCM3.4 eeprom 95640 location
(11-04-2019, 20:03 PM)victorysatgr Wrote: Hi Martech Work flawless on this ECU , i did it thousand time But UPA should Work too , just set up VCC table to3.30 volts if i remember well I would like to try again with upa since i have some non working ECU's in Workshop looking forward to your try ![]() Best Regards V BEST CHIPTUNING SERVICE BY Zenter Performance
![]() Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY ![]() -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv ![]() Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
12-04-2019, 02:40 AM,
(This post was last modified: 12-04-2019, 02:41 AM by victorysatgr.)
Post: #14
|
|||
|
|||
RE: DCM3.4 eeprom 95640 location
Unfortunately I don't have martech...
I give a try with upa.... Using this pinout right? |
|||
12-04-2019, 10:14 AM,
(This post was last modified: 12-04-2019, 10:18 AM by victorysatgr.)
Post: #15
|
|||
|
|||
RE: DCM3.4 eeprom 95640 location
Hi again...
I read it once with upa (clone) but I didn't get Correct bin.... At the end of the file I have 00 and I should have FF.... I compare it and with other dumps and I see and other mistakes on my file... Now I can't connect at all to read the eeprom.... That have to do with upa?..... |