Possibly Related Threads…

***onoff*** · 14-02-2019, 11:47 AM,

searching for 5N0920883H_1104.odx
and
I need SW 180 or 162 for
this modul….

Address 16: Steering wheel (J527) Labels speechless

5K0-953-569.clb
Part No SW: 5K0 953 501 BH HW: 5K0 953 569 L
Component: LENKS.MODUL 014 0140

14-02-2019, 11:58 AM,

Hi guys,

I need help please with correct file software for DSG7 unit VW Scirocco 1.4TSI year 2010.
The car was to lot of garages and seems that original software has been changed.
In this moment I have 0AM300048N sw ver 2155 (v0693z550AM___getriebe_DSG_Ob3z_sw.sgo)

Thanks in advance

Best regards

***docker*** · 05-03-2019, 16:26 PM,

Can someone please find a flash file for seat ibiza stereo part no 5F0919604A thanks

***Rainesh*** · 01-04-2019, 10:19 AM,

(14-02-2019, 11:58 AM)eteodun Wrote: Hi guys,

I need help please with correct file software for DSG7 unit VW Scirocco 1.4TSI year 2010.
The car was to lot of garages and seems that original software has been changed.
In this moment I have 0AM300048N sw ver 2155 (v0693z550AM___getriebe_DSG_Ob3z_sw.sgo)

Thanks in advance

Best regards

Use: v0693z560AM___getriebe_DSG_Ob3z_sw.sgo (0AM300048N [ Ob3z 0AM300048N 9056 000V C90S])

06-04-2019, 12:25 PM,

Can you please help me on what settings I need to make to odis to be able to write sgo files and ECUs which are not UDS?

Thanks!

(17-07-2016, 03:37 AM)vagvag Wrote:
(16-07-2016, 10:28 AM)homer79 Wrote:
(16-07-2016, 05:10 AM)vagvag Wrote:
(15-07-2016, 17:50 PM)homer79 Wrote: Can i downgrade to that firmware with Odis-E and a good VAS with OKI Chip after VW forced me to update to the new shitty firmware?
Any advices?
Hi..........
On any UDS ecu you can update or to downgrade or even to interrupt during the flashing and to restart..........
So you can play with your car and with your ecu as you wish and with anything that you wish.........
Regarts........

Hey thanks for your answer.
I am not sure whether i already have an ECU with UDS protocol.
When i connect to my ECU with VCDS the connection type says "CAN" not "UDS". It is a Bosch EDC17 in a 2009 Audi A3 2.0 TDI
Also it is a .sgo file. As far as i understood .sgo files are not for flashing UDS ECUs but older ones.

Any more hints?

One more question. When i want to flash with ODIS-E what should be considered for safety? Put the batterie on an external charger and the Laptop also on external Power supply.. more things to consider?

Kind Regards
Hi again............
If your car is from the 'last' ones little before VAG released cars with UDS ecus then you cant to 'play' as i describe above........
The .sgo files correct they are not for UDS ecus......
You can still update or downgrade your ecu for your car with the Odis-E but you need to configure your Odis-E to allow you to make this........
About safety you must be sure that you have proper VAS5054A if we talking for clone head and of course good and stable charger in your car battery as you said.......
Good luck!!!!!!!!!
Regarts.........

***Dee67*** · 12-04-2019, 07:28 AM,

Hi, All
I have just installed VAS-PC on WIN7x64 from Fantomels collection (Thanks Fantomel) but I am unable to configure my VCX Nano (for Odis) interface with it.
I have successfully installed ODIS Engineering 8.2.3 and Odis 4.4.10 on other laptop (WIN7x64) and working with this interface.
Can someone help to configure my VCX Nano to work with VAS-PC.
Thanks in advance

***apoelistas*** · 12-04-2019, 16:24 PM,

You think you have successfully configured vcx nano with odis-e. It does not flash.

***vagvag*** · 12-04-2019, 16:40 PM,

(12-04-2019, 07:28 AM)Dee67 Wrote: Hi, All
I have just installed VAS-PC on WIN7x64 from Fantomels collection (Thanks Fantomel) but I am unable to configure my VCX Nano (for Odis) interface with it.
I have successfully installed ODIS Engineering 8.2.3 and Odis 4.4.10 on other laptop (WIN7x64) and working with this interface.
Can someone help to configure my VCX Nano to work with VAS-PC.
Thanks in advance

Vas-Pc does not run and not works under 64bit....... Only under 32bit..........
Regarts........ beer

***apoelistas*** · (This post was last modified: 12-04-2019, 16:52 PM by apoelistas.)

(12-04-2019, 16:40 PM)vagvag Wrote: Vas-Pc does not run and not works under 64bit....... Only under 32bit..........
Regarts........

Does not work on win7 x32 only on XP.

Have to set it up on my very old laptop.

***vagvag*** · 12-04-2019, 16:52 PM,

(12-04-2019, 16:48 PM)apoelistas Wrote: Does not work on win7 x32 only on XP.

Vas-Pc works on 32bit windows 7, just you must configure 3 files with admin and windows xp compatibility mode.......
C:\SIDIS\home\bin\ADM.exe
C:\SIDIS\home\bin\GFS.exe
C:\SIDIS\home\VASEGD2\bin\VASEGD.exe
Regarts....... beer

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ODIS-Service 7.2.1 Postsetup 4220 (test)	Tadk	1,068	102,497	47 minutes ago Last Post: yang3113
	VAG Group Service/mileage history	touchneo	1,730	142,940	Yesterday, 14:29 PM Last Post: Andy307
	Latest Odis Service and Engineering for VAS5054 Torrent Without PASS	Zenix	21	9,414	Yesterday, 10:21 AM Last Post: koldplayer
	ODIS-Service_update_23_0_1-EU_20240418_Postsetup_230001.105.1350_test	Tadk	319	19,934	Yesterday, 09:42 AM Last Post: pablo202
	Last Odis Version on windows 7 with vas 5054a	rochenlebelle	2	504	26-04-2024, 19:25 PM Last Post: champagnecharly
	Odis Engineering 14.1.0 + Activations	justdiag	538	62,115	25-04-2024, 20:57 PM Last Post: Mastahh
	ODIS Service 23.2.2 + Activations	justdiag	64	4,778	25-04-2024, 15:24 PM Last Post: billyleon
	Can someone help me flash the parameters of the camera?	glljh2016	1	53	25-04-2024, 15:03 PM Last Post: Tomey
	ODIS Service 11.0.1 + Activations	justdiag	110	9,855	24-04-2024, 20:37 PM Last Post: Stig33
	Audi a7 c8 zFAS 291 flash help	tomtomek	8	296	21-04-2024, 19:43 PM Last Post: audimees

Contact Us