[Bimmer540]

Is it possible to Coding out TPMS sensors from BMW E53 4.6is 2002 so that no message appears.

[Enabled]

Remove 2VB from VO, code whole vehicle, unplug TPMS module.

[cursor]

Remove 2VB from VO, code whole vehicle, unplug TPMS module.

This is E53, not E70 or F15
It based on ZCS Code, not FA



Decode options from VIN(RDC can be 2VB or 265) or use BMW Scanner Demo with USB - K-line cable

Put here actual ZCS. I modify it for You

[dazuc]

It should be a option available in the AKMB.

(Cluster)

Post trace I can help remove.

[Batje]

Is it possible to Coding out TPMS sensors from BMW E53 4.6is 2002 so that no message appears.

Look in the --CHASSIS--ZST.000 file in your NCSexpert daten folder.
Find the right line for TPMS, look at which string you need to change (GM string, SA string,..), on which position the digit is you need to change and what the number is you need to subtract.

Go to NCS, read ZCS out of the car, press enter ZCS. leave vin as is, uncheck calculate checksum.
next remove the last digit from every string, check calculate checksum.

in the string you need to change mark the position found in the first step and subtract the number found in the first step from that position.

Write the ZCS to the modules storing it and then code the relevant modules.

[FSCmap]

Is it possible to Coding out TPMS sensors from BMW E53 4.6is 2002 so that no message appears.

SA, digit position 14, substract 4 from its value and recalculate checksum. This would remove 0265 option.