Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW S1000RR display speed 299+ coding
01-05-2019, 09:03 AM,
(This post was last modified: 01-05-2019, 13:42 PM by beemered.)
Post: #1
|
|||
|
|||
BMW S1000RR display speed 299+ coding
Coded a S1000RR year 2013 to display speed above 299 kmph (changed 299 to 399). Bike is modified and on dyno it now shows 363 kmph on display. So all ok.
Coded another S1000RR, but year 2018 to display speed above 299 kmph. Bike is also modified, but on dyno it shows 320 kmph max on display. What is the difference between 2013 and 2018 bikes? Is there something more to change in ESYS coding? Is there a Speed limiter? Thanks. |
|||
01-05-2019, 16:08 PM,
Post: #2
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
Do you change this in kombi or engine ecu
|
|||
01-05-2019, 16:49 PM,
Post: #3
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
Display speed coded in kombi
|
|||
01-05-2019, 19:43 PM,
Post: #4
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
I think the hardware is different, therefore the coding is also... sw, and cafd also
Vojnó
Press Thanks and reputation if this post helped you. |
|||
06-05-2019, 08:07 AM,
Post: #5
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
320 because rpm limit, can't over 320 without change rev limit (14200 for stock)
|
|||
30-05-2019, 05:36 AM,
Post: #6
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
Can a ENET cable be used on BMW bikes to connect with esys?
|
|||
01-06-2019, 16:44 PM,
Post: #7
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
(30-05-2019, 05:36 AM)SuddenlyFast Wrote: Can a ENET cable be used on BMW bikes to connect with esys? Definitely not! Vojnó
Press Thanks and reputation if this post helped you. |
|||
02-06-2019, 00:58 AM,
Post: #8
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
|
|||
03-06-2019, 08:18 AM,
Post: #9
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
Then you need ICOM NEXT A (or old A, A2).
Maybe with D-CAN interface is also good for ISTA+ but for E-sys I newer try! Vojnó
Press Thanks and reputation if this post helped you. |
|||
23-01-2022, 19:49 PM,
Post: #10
|
|||
|
|||
RE: BMW S1000RR display speed 299+ coding
It works with all types of Icom. Coding my S1000RR 15er. Looking nice
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
How to code 5 level heated grip on S1000RR TFT? | dlgudqja1282 | 14 | 2,063 |
28-11-2023, 01:57 AM Last Post: dlgudqja1282 |
|
VIN change in used TFT display s1000RR | Jbpetkov | 15 | 2,449 |
21-11-2023, 01:56 AM Last Post: chiisan |
|
Motorrad TFT coding options list | Jbpetkov | 13 | 3,345 |
12-11-2023, 12:56 PM Last Post: NIGHT2000 |
|
K1300 K40 - NCS expert On Board Computer coding explanation? | Nerox | 3 | 451 |
15-10-2023, 14:18 PM Last Post: Vojno |
|
Solved ✔ BMW RDC (TPMS) Sensor ID HEX coding ? | Nerox | 8 | 872 |
05-09-2023, 15:16 PM Last Post: Nerox |
|
Motorrad coding software with ICOM | bmwgstech | 8 | 1,389 |
03-09-2023, 18:17 PM Last Post: laalves911 |
|
S1000RR Gen3 GM Module | Arg0N | 2 | 511 |
26-01-2023, 17:40 PM Last Post: Arg0N |
|
TFT S1000RR on S1000XR ? | HeLLs | 5 | 794 |
02-01-2023, 19:31 PM Last Post: aejanow |
|
S1000RR K46 HP Race Calibration Kit 3 | piotrekb_s3 | 0 | 434 |
01-01-2023, 17:16 PM Last Post: piotrekb_s3 |
|
motorcycle coding | benzxie | 2 | 889 |
20-06-2022, 08:41 AM Last Post: Bagum4uk |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content