[pavlo321]

Hi everyone,

Is it possible to code/enable Traffic Sign Assist in Instrument Cluster/HUD on 2015 S class W222?
I have read somewhere you need to code EIS222 and IC222 with Vediamo but don't know what to change.
Can anyone share if they know procedure to use Vediamo to enable TSA or SLA on USA W222?

Thank you!!!

[ltujustas]

You need find VO code in EIS222 traffic sign and speed limit then turn it on after go to the instrument cluster. Please, find vo code which you want to turn on. Or put here EIS coding data from vediamo and say VO code for these retrofits.

[pavlo321]

Thank you for your response!

I think I need option code SA513 - Traffic Sign Assist to read signs in Instrument Cluster and Heads up Display.
I am attaching the EIS222 and IC222, HU5, HUD222 and SMPC222 CBF Files here. Can you please let me know what must be done? 
How do I add change VO/SA Code in Vediamo?

You need find VO code in EIS222 traffic sign and speed limit then turn it on after go to the instrument cluster. Please, find vo code which you want to turn on. Or put here EIS coding data from vediamo and say VO code for these retrofits.

[ltujustas]

Please set in 10.VCD_EVC_CfgBit_65_96 - 513 ROAD SIGN DETECTION (SLA) to JA in EIS

[pavlo321]

Thank you! I will change it today. After this change, anything must be coded in IC222 for menu to show up on/off?
No other coding changes to make this work?

Please set in 10.VCD_EVC_CfgBit_65_96 - 513 ROAD SIGN DETECTION (SLA) to JA in EIS

[ltujustas]

Just turn on that, and take a look at differences. After we will try to find SLA TSA at other modules

[pavlo321]

Hi ltujustas,

Today I tried to connect to EIS and change the 513 SLA to JA Active
I get this error when I click ECU_Code.
DiagManager: 06067iagService refused




I tried to search what this is, not sure what to do to unlock this change. Any advice?

Thank you

Just turn on that, and take a look at differences. After we will try to find SLA TSA at other modules

---

I read online that EIS does not need to be unlocked, maybe my EIS222 CBF file is corrupt. Would there be a good EIS222 file that can be shared or other solution?

---

I read online that EIS does not need to be unlocked, maybe my EIS222 CBF file is corrupt. Would there be a good EIS222 file that can be shared or other solution?

[Reshi]

your file is good you are doing it wrong

[ltujustas]

Hi ltujustas,

Today I tried to connect to EIS and change the 513 SLA to JA Active
I get this error when I click ECU_Code.
DiagManager: 06067iagService refused




I tried to search what this is, not sure what to do to unlock this change. Any advice?

Thank you

Just turn on that, and take a look at differences. After we will try to find SLA TSA at other modules

---

I read online that EIS does not need to be unlocked, maybe my EIS222 CBF file is corrupt. Would there be a good EIS222 file that can be shared or other solution?

---

I read online that EIS does not need to be unlocked, maybe my EIS222 CBF file is corrupt. Would there be a good EIS222 file that can be shared or other solution?

I don't know what you doing there. Try with dts monaco....

[pavlo321]

Thanks for the reply Reshi and ltujastas,

I am using vediamo CBC files. Connecting to EIS222 ecu and then going to variant coding function and changing the 513 line of code from “nein” to “ja” then executing “code ecu” and it gives that error. 

I use j2534 interface so I cannot use Monaco because it doesn’t support that. 
Reshi, if I am doing it wrong with my file, can you tell me the right way vediamo can do this change?i am very excited to do this change and try!

Thank you both, I will also keep searching for solution.