Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F01 used LED headlight coding
11-07-2019, 13:17 PM,
Post: #1
|
|||
|
|||
F01 used LED headlight coding
Hello,
I replaced the complete headlight on f01 lci and doesn’t work. Ista says no communication with STML module and light doesn’t work. Anybody has steps how to code a used led adaptive headlight ? The car has led from factory it’s not retrofit. Thank you. |
|||
11-07-2019, 13:45 PM,
Post: #2
|
|||
|
|||
RE: F01 used LED headlight coding
u retrofit or replace?
|
|||
11-07-2019, 13:54 PM,
Post: #3
|
|||
|
|||
RE: F01 used LED headlight coding
|
|||
11-07-2019, 14:02 PM,
Post: #4
|
|||
|
|||
RE: F01 used LED headlight coding
check wiring, if ok then stml unit
|
|||
11-07-2019, 14:03 PM,
Post: #5
|
|||
|
|||
RE: F01 used LED headlight coding
|
|||
11-07-2019, 15:00 PM,
Post: #6
|
|||
|
|||
RE: F01 used LED headlight coding
Check fuse’s. Happend to me twice that fuse was blown and that was the reason why i can’t connect with tms.
Thanks
|
|||
11-07-2019, 15:02 PM,
Post: #7
|
|||
|
|||
RE: F01 used LED headlight coding
|
|||
11-07-2019, 16:46 PM,
Post: #8
|
|||
|
|||
RE: F01 used LED headlight coding
Check left headlight fuse.
newtis.info BMW coding On-line
|
|||
11-07-2019, 17:11 PM,
Post: #9
|
|||
|
|||
RE: F01 used LED headlight coding
I was just doing this last week. The brown wires are ground, so check for power with a DMM. Both the large and small red wires should have 12v power. There are at least 2 fuses that control this. If wiring checks out, try a different module. Injecting CAFD with E-sys was the easiest way to get things running
|
|||
11-07-2019, 17:20 PM,
Post: #10
|
|||
|
|||
RE: F01 used LED headlight coding
(11-07-2019, 17:11 PM)RocketSurgeon Wrote: I was just doing this last week. The brown wires are ground, so check for power with a DMM. Both the large and small red wires should have 12v power. There are at least 2 fuses that control this. If wiring checks out, try a different module. Injecting CAFD with E-sys was the easiest way to get things running Thanks I’ll take a look. Do the red wires always have 12v or only with ignition on or headlight on ? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW E71 EGS coding 8HP70 used | BS68 | 4 | 239 |
04-05-2024, 18:08 PM Last Post: Ryzen |
|
F25 5AS,8th and 5AC coding with 6wb kombi | simplextibi | 1 | 70 |
04-05-2024, 06:37 AM Last Post: Stratofortress |
|
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 84 |
27-04-2024, 20:27 PM Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,118 |
27-04-2024, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 231 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Coding a F80 M3 race car | PeterY | 10 | 593 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 666 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 271 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 254 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
pulling both paddles put transmission into neutral coding | tintoverano | 1 | 146 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content