Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Coding BMW motorcycle K1600gt
|
13-04-2019, 06:25 AM,
Post: #41
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
We all use icom and ista D,but not esys to code the motorcycle.Can you use esys without getting connection error?
(12-04-2019, 21:58 PM)fredaroony Wrote: I've used ICOM/Ethernet on many K001 bikes without issue. I've also setup friends with the same configuration and it all works for them. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
13-04-2019, 06:52 AM,
(This post was last modified: 13-04-2019, 06:54 AM by fredaroony.)
Post: #42
|
|||
|
|||
RE: Coding BMW motorcycle K1600gt
(13-04-2019, 06:25 AM)pdc Wrote: We all use icom and ista D,but not esys to code the motorcycle.Can you use esys without getting connection error? Yes, I posted a screenshot of my connection setting a few posts up. The post you quoted was talking about the e-sys connection setting I use, not ISTA. |
|||
|
|
|
18-04-2019, 11:26 AM,
Post: #43
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
hello i try 2014 gs it is ok but when i try to 2017 gs (obd 16pin) esys failed how can i fix it ?
thanks for all members
|
|||
|
|
|
18-04-2019, 12:48 PM,
Post: #44
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
If you use Esys to 2017 GS then you must set ICOM/D-CAN to connect!
Vojnó
Press Thanks and reputation  if this post helped you. |
|||
|
|
|
17-06-2019, 02:54 AM,
Post: #45
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
Hi, is possible connect r1200r lc 2015 without ICOM?
|
|||
|
|
|
17-06-2019, 07:41 AM,
Post: #46
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
|
|||
|
|
|
11-07-2019, 20:32 PM,
Post: #47
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
i try connect to R1200GS K50 (esys), but not successful. ISTA reads correct. i have OEM icom NEXT A and icom d cable from china..i am confused
ferrum wrote: Coding in e-sys only works with the original icom-d! inspi1981 wrote: I don't have any problem on K48 with original ICOM Next and cheap reduction from China. Work perfect with Esys where is the truth then? motorbike has only 4 connection points in the connector, ground,bat+ , Can low, can high Thanks in advance. Press Thanks and Reputation, if my post helped you.
|
|||
|
|
|
11-07-2019, 21:57 PM,
Post: #48
|
|||
|
|||
RE: Coding BMW motorcycle K1600gt
(11-07-2019, 20:32 PM)warhol99 Wrote: i try connect to R1200GS K50 (esys), but not successful. ISTA reads correct. i have OEM icom NEXT A and icom d cable from china..i am confused If ISTA works the e-sys will too but you have to use the right settings. I use these settings to connect to my K50 https://cartechnology.co.uk/showthread.p...#pid438420 |
|||
|
|
|
12-07-2019, 09:30 AM,
Post: #49
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
i use the right settings .There are two version of ICOM D chinese cable , i have cable1- no connection to esys, cable2 probably works as i read some posts.
what are three connectors on the cable2? Press Thanks and Reputation, if my post helped you.
|
|||
|
|
|
12-07-2019, 09:51 AM,
Post: #50
|
|||
|
|||
|
RE: Coding BMW motorcycle K1600gt
I have one from first Picture. Work fine with esys and ISTA on K48
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
