[lustek]

Hi,

I was complette flash of all ecu on F10 LCI.
Everythink working beside LED in one lamp - right.
Everytime when I try initialization it fails with error.
Before flash it work ok.

Second think is that ista stop showing info aboute engine...N55


Any help?

[kubixix]

Hi,

I was complette flash of all ecu on F10 LCI.
Everythink working beside LED in one lamp - right.
Everytime when I try initialization it fails with error.
Before flash it work ok.

Second think is that ista stop showing info aboute engine...N55


Any help?

Both lamps are us version?

[lustek]

Hi,

I was complette flash of all ecu on F10 LCI.
Everythink working beside LED in one lamp - right.
Everytime when I try initialization it fails with error.
Before flash it work ok.

Second think is that ista stop showing info aboute engine...N55


Any help?

Both lamps are us version?

No, one is us and one is ece. Us work but ece not. I use modif fa when flashing ece tms....
Reflashing that tms could help? How to force esys to do that? I see instruction few weeks ago here on forum but it is no avaible any more

[kubixix]

Hi,

I was complette flash of all ecu on F10 LCI.
Everythink working beside LED in one lamp - right.
Everytime when I try initialization it fails with error.
Before flash it work ok.

Second think is that ista stop showing info aboute engine...N55


Any help?

Both lamps are us version?

No, one is us and one is ece. Us work but ece not. I use modif fa when flashing ece tms....
Reflashing that tms could help? How to force esys to do that? I see instruction few weeks ago here on forum but it is no avaible any more

That’s the reason why you can’t run initialization.

[lustek]

Problem solved. After reflashing tms, lamp working ok.
Thanks

[lustek]

Hi,

I was complette flash of all ecu on F10 LCI.
Everythink working beside LED in one lamp - right.
Everytime when I try initialization it fails with error.
Before flash it work ok.

Second think is that ista stop showing info aboute engine...N55


Any help?

Both lamps are us version?

No, one is us and one is ece. Us work but ece not. I use modif fa when flashing ece tms....
Reflashing that tms could help? How to force esys to do that? I see instruction few weeks ago here on forum but it is no avaible any more

That’s the reason why you can’t run initialization.

Like I write before leds working until flash. I do initialization before and everything was OK. So you can have one lamp us and one eu and they are working good. 


In my case, after reflashing tms and initialization lamp start working.

[lustek]

Ok, so problem came back. It work 1,5 days and stop.
Ista show fault dc/dc converter and coding. No way to initialize module.
I try code that module and inject cafd.

What is dc/dc converter? It is build in tms or it is led source light?
And one more think. I yesterday update all modules but after that I not coded them. Coding after flash is requred or it is coding while flashing?

Anybody could help?

[SweetBMW]

It depends what you checked in esys. A normal
TAL Will also execute coding. (Cddeploy)