[Bimmer540]

I use ista 4.18.32 and sdp/blp 4.18.33

Programming goes whitout problems but it wil not code HU-H?

freezes with code manual?

I use router and icom Next from dealer.

[Fx82]

Code manually with e-sys.

[Bimmer540]

Code manually with e-sys.

Can you explain me how to do it.

[Fx82]

Make connection with the car, read out modules, select navi unit and select code.

[Bimmer540]

Make connection with the car, read out modules, select navi unit and select code.

With e-sys launcher?

But what could be the problem with ista?

[Fx82]

Doesn't matter e-sys or e-sys launcher.

I don't what the problem is with ista. I don't have it.

[Matthew53]

Coding Tab
Read FA>Activate FA>SVT Actual (Read VCM)>Select HU>CAFD>Code

[Bimmer540]

Coding Tab
Read FA>Activate FA>SVT Actual (Read VCM)>Select HU>CAFD>Code

When i use esys i see no cafd in hu-h?

And where can i find tab SVT Actual?

[tokarszczak]

Can help remotely, you will learn

[lustek]

Parrarel programming error for shure. In final raport of ista you shoud see why ecu was not updated.
I try updating using icom+router and ended with error aboute switching unit to parrarel programming faild.

Then i use enet and esys. Be prepare to have esys in version 3.27. In 3.33 i get http error while flashing hu-h.