Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW Icom A2 repair
14-09-2019, 07:07 AM,
Post: #61
|
|||
|
|||
RE: BMW Icom A2 repair
The simplest thing you can try is to restore the firmware. Sometimes it helps. If the button does not work for you, then check if it is disabled.
|
|||
14-09-2019, 07:19 AM,
Post: #62
|
|||
|
|||
RE: BMW Icom A2 repair
i'll try,
in mine dont have conetion button, can you explan what i must to do? just bypass or conected using wire? |
|||
14-09-2019, 08:19 AM,
Post: #63
|
|||
|
|||
RE: BMW Icom A2 repair
Hi
I have a problem with my icom A2 clone. On example E60 before 3/2007, he no longer recognizes the ignition. Vehicles after 3/2007 and F model functions without problems. does anyone have an idea? System flashes green then red then .... |
|||
14-09-2019, 10:10 AM,
(This post was last modified: 26-02-2022, 01:03 AM by ferrum.)
Post: #64
|
|||
|
|||
RE: BMW Icom A2 repair
You have it in emergency mode due to a fan error.
You need to connect the fan and start with icom so that the error is reset. If you continue to use with this error, the icom will stop working and it will be difficult to restore it. Recognizes voltage mega 16. Check the voltage as I indicated in the photo |
|||
Reputation: +4 - McMihai [+1] , Vojno [+1] , Tech206 [+1] , dave1982 [+1] | |||
15-09-2019, 18:19 PM,
Post: #65
|
|||
|
|||
RE: BMW Icom A2 repair
|
|||
15-09-2019, 21:13 PM,
Post: #66
|
|||
|
|||
RE: BMW Icom A2 repair
(14-09-2019, 10:10 AM)ferrum Wrote: You have it in emergency mode due to a fan error. hi Ferrum, i don't have xprog eprom adapter so i can't change serial, there is another way to do it? I see here on other thread a pic of icom 60080 page with option for changing e2p data.... please can you explain me more? My icom a2 was with flashing red system light and log with fan failure |
|||
16-09-2019, 12:28 PM,
Post: #67
|
|||
|
|||
RE: BMW Icom A2 repair
Then you just need to connect the fan to reset the error.
Changing the serial number and flashing in A2 must be done so that the error does not appear. |
|||
25-09-2019, 23:06 PM,
Post: #68
|
|||
|
|||
RE: BMW Icom A2 repair
Hello members. Icom a2 suddenly stopped working. No reaction The system LED blinks then lights up. But the lanu diode doesn't light up at all. The restore usb programming starts but unfortunately it doesn't stop. Connection cable transformer LAN approx. I replaced the Micrel processor from the second icom where the connection is ale no change. I am asking for some information. PZD. David
|
|||
27-09-2019, 11:05 AM,
Post: #69
|
|||
|
|||
RE: BMW Icom A2 repair
Hi,
How often do we must reset fan error to be safe not damage icom? For example 100 car connection or 500? If I helped, please magic buttons thx+rep
|
|||
27-09-2019, 14:30 PM,
Post: #70
|
|||
|
|||
RE: BMW Icom A2 repair
As soon as an error appears you need to reset.
If there is an error, the system LED continues to flash after loading in orange. I recommend reflashing with replacing the serial number to exclude the appearance of such an error. the error will appear often if the cooling is not installed or you program a lot |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
Pedrom92, 1 Guest(s)
Pedrom92, 1 Guest(s)
Return to TopReturn to Content