Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA Standalone / Standard Tools / PSdZData_Lite - last [MEGA]
17-10-2019, 11:12 AM,
Post: #391
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
You can use your DCAN, but must simulate voltage. If you install ISTA with my installer, then is VoltageControl included, but must activate it, look in Startmenu.

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
17-10-2019, 12:38 PM,
Post: #392
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(17-10-2019, 11:12 AM)Sedoy Wrote:  You can use your DCAN, but must simulate voltage. If you install ISTA with my installer, then is VoltageControl included, but must activate it, look in Startmenu.

Yes, i do see that Voltage Control on Startmenu. I activated it and still no connection. However, I did play with
port settings and edit obd.ini file. Would this be causing the issue? OR should I re-install again with your installer and leave everything as default? with the exception of ISTA+ interface settings.
Quote this message in a reply
17-10-2019, 19:10 PM,
Post: #393
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(29-01-2019, 19:49 PM)Sedoy Wrote:  This Thread is for my Standalone Releases, always latest.

ISTA Standalone

* HW-check disable only if needed (replace ISTAGUI.exe with ISTAGUI.exe_HW_patch)
* read FASTA Data from Vehicle is disabled in Config
* no VIN7 patch
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC.
* to programming with ENET replace RheingoldProgramming.dll with RheingoldProgramming.dll.patched_for_ENET_programming (At your own risk.)

- for Diagnose only, neccessary SQLiteDBs OTHER, en-GB, de-DE and BLP in the same Version as App (example 4.17.4x).
- for Programming is SDP needed, using older Versions allowed. Not ask me for upload.


Standalone: ISTA 4.19.40.18949 / SQLiteDBs (en-GB,de-DE) 4.19.40 / BLP 4.19.40
Standalone Installer (all above files/folders must be present in the same directory):  v4.19.40
PSdZData Lite: v4.19.40



Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

Hello,

Can this standalone be update with insta launcher console 1.2.2? if so which files are needed?
Regards
Quote this message in a reply
17-10-2019, 19:38 PM, (This post was last modified: 17-10-2019, 19:38 PM by Sedoy.)
Post: #394
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
This is actual Version!

You can update with IstaLauncherConsole to next update, when it appears, but only SQLiteDBs/SDP/BLP, not App itself.

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
17-10-2019, 20:13 PM,
Post: #395
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(17-10-2019, 19:38 PM)Sedoy Wrote:  This is actual Version!

You can update with IstaLauncherConsole to next update, when it appears, but only SQLiteDBs/SDP/BLP, not App itself.

I see, I'm having issues with version 4.19.40 (works fine on 4.19.30) when a new standalone version comes out, i delete everything from ista folder, copy the new files,then i run rcleaner4.4, reboot and launch ista i enter the license info, i close it and run ista launcher console it updates all the SQLiteDBs/SDP/BLP files then it completes successfully but with 4.19.40 its not working, i get a IstaLaucherServiceImpl.PerformServiceTasks - Exception occurred: System.IO.DirectoryNotFoundException: Directory not found while copying C:\Temp\ISTA_Store\Temp\BMW_ISPI_ISTA_DELTA-SDP_4.19.11\psdzdata\kiswb\S15A\KIS.backup to C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\PSdZ\data_swi\psdzdata\kiswb\S15A\KIS.backup ---> System.IO.DirectoryNotFoundException: Could not find a part of the path.
Quote this message in a reply
18-10-2019, 08:18 AM, (This post was last modified: 18-10-2019, 13:47 PM by Clusters.)
Post: #396
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
Hi Sedoy,

Can you or anyone help me with this issue?

ISTA installed and launches fine, but I cannot get test plan or service functions to work on my E39. I think they may be working for newer cars though. But I never had this issue with previous versions of ISTA. Is there a problem with my install or something else? I really would like this to work.

I am using ICOM connection and did the vehicle test.


You can test yourself by putting in this VIN (attached photo) and look at service functions if yours is blank or not.


Attached Files
photos.txt
File Type: .txt
Downloaded: 17 times
Size: 130 bytes

Quote this message in a reply
18-10-2019, 14:25 PM,
Post: #397
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(18-10-2019, 08:18 AM)TheShafro Wrote:  Hi Sedoy,

Can you or anyone help me with this issue?

ISTA installed and launches fine, but I cannot get test plan or service functions to work on my E39. I think they may be working for newer cars though. But I never had this issue with previous versions of ISTA. Is there a problem with my install or something else? I really would like this to work.

I am using ICOM connection and did the vehicle test.


You can test yourself by putting in this VIN (attached photo) and look at service functions if yours is blank or not.

Likely problem with your install. Vehicle construction date is incorrect..
Quote this message in a reply
[+] 2 users say Thank You to beemerboy88 for this post
18-10-2019, 14:50 PM,
Post: #398
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(17-10-2019, 20:13 PM)Wesk18 Wrote:  
(17-10-2019, 19:38 PM)Sedoy Wrote:  This is actual Version!

You can update with IstaLauncherConsole to next update, when it appears, but only SQLiteDBs/SDP/BLP, not App itself.

I see, I'm having issues with version 4.19.40 (works fine on 4.19.30) when a new standalone version comes out, i delete everything from ista folder, copy the new files,then i run rcleaner4.4, reboot and launch ista i enter the license info, i close it and run ista launcher console it updates all the SQLiteDBs/SDP/BLP files then it completes successfully but with 4.19.40 its not working, i get a IstaLaucherServiceImpl.PerformServiceTasks - Exception occurred: System.IO.DirectoryNotFoundException: Directory not found while copying C:\Temp\ISTA_Store\Temp\BMW_ISPI_ISTA_DELTA-SDP_4.19.11\psdzdata\kiswb\S15A\KIS.backup to C:\Program Files (x86)\BMW\ISPI\TRIC\ISTA\PSdZ\data_swi\psdzdata\kiswb\S15A\KIS.backup ---> System.IO.DirectoryNotFoundException: Could not find a part of the path.

Check your IstaLauncherConsole registry-settings. You have delete it from registry with rcleaner.

Further discussion on IstaLauncherConsole please here.

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
18-10-2019, 17:06 PM,
Post: #399
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(18-10-2019, 08:18 AM)TheShafro Wrote:  Hi Sedoy,

Can you or anyone help me with this issue?

ISTA installed and launches fine, but I cannot get test plan or service functions to work on my E39. I think they may be working for newer cars though. But I never had this issue with previous versions of ISTA. Is there a problem with my install or something else? I really would like this to work.

I am using ICOM connection and did the vehicle test.


You can test yourself by putting in this VIN (attached photo) and look at service functions if yours is blank or not.

I have installed ISTA 4.19.15. Using your VIN, ISTA shows Service Funktions.


Attached Files Thumbnail(s)
   
Quote this message in a reply
[+] 1 user says Thank You to wenhantho for this post
18-10-2019, 19:02 PM,
Post: #400
RE: ISTA Standalone / SQLiteDBs / BLP / PSdZData_Lite - latest [MEGA]
(18-10-2019, 14:25 PM)beemerboy88 Wrote:  Likely problem with your install. Vehicle construction date is incorrect..

Well any idea where I should start looking? All I did was download Sedoy's files and ran the installer. It did everything from there. Yeah, I just noticed the construction date as well. 

(18-10-2019, 17:06 PM)wenhantho Wrote:  I have installed ISTA 4.19.15. Using your VIN, ISTA shows Service Funktions.

Which windows are you running? I recently switched to Windows 10; never had an issue running in Windows 7
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 33 2,996 5 hours ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,640 7 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 38 10 hours ago
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 356 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,330 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,461 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW |ON MEGA| /// ALL ROAD MAPS EUROPE -> 2024 NEW + *KEY-TOOLS* hashtagmaster 206 66,015 27-03-2024, 08:22 AM
Last Post: hashtagmaster
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,763 27-03-2024, 05:59 AM
Last Post: hashtagmaster
XZBMW PSdZData 4.46.31 Full (MEGA) charlesjyw 0 131 26-03-2024, 18:07 PM
Last Post: charlesjyw
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 126 26-03-2024, 12:09 PM
Last Post: hlip

Forum Jump:


Users browsing this thread:
9 Guest(s)

Return to TopReturn to Content