Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-D and ISTA-P not Working!
17-10-2019, 20:08 PM,
Post: #1
|
|||
|
|||
ISTA-D and ISTA-P not Working!
Hello community,
I have installed ISTA-D and ISTA-P on my computer, but when I try connect to my car with K+DKAN cable nothing happens. I have on my computer NCS Expert and INPA and these tools is working very well (NCS Expert, INPA and WinKFP). I use the same EDIABAS to use these tools, I've checked on youtube and suposly these two different tools is compatible without problems, and I followed the installation instructions carefully. I'm using COM1 port (I already tryed with COM9 but unsuccessfully). Someone with the same problem? ISTA-D ERROR: ISTA-P ERRORS: |
|||
17-10-2019, 20:40 PM,
Post: #2
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
Can you post picture from ista+ settings -- interface
|
|||
17-10-2019, 21:11 PM,
Post: #3
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
what is the car??
|
|||
17-10-2019, 21:29 PM,
(This post was last modified: 17-10-2019, 21:30 PM by JoaoVaranda.)
Post: #4
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
|
|||
17-10-2019, 21:55 PM,
(This post was last modified: 17-10-2019, 21:56 PM by user0086.)
Post: #5
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
To which port did you connect the cable? OBD2 or the 20-pin round BMW connector? Can you access all modules with INPA / NCS Expert?
|
|||
17-10-2019, 21:57 PM,
(This post was last modified: 17-10-2019, 22:01 PM by JoaoVaranda.)
Post: #6
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
|
|||
18-10-2019, 04:07 AM,
Post: #7
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
Try Workaround:
1. open Session in ISTA with your VIN 2. if all Ok, connect to Car 3. make complete identification |
|||
18-10-2019, 19:49 PM,
Post: #8
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
|
|||
19-10-2019, 13:32 PM,
Post: #9
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
(18-10-2019, 19:49 PM)JoaoVaranda Wrote:(18-10-2019, 04:07 AM)Sedoy Wrote: Try Workaround: Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules. Which Ediabas is installed? |
|||
19-10-2019, 14:05 PM,
Post: #10
|
|||
|
|||
RE: ISTA-D and ISTA-P not Working!
(19-10-2019, 13:32 PM)Spirit5676 Wrote: Which model year is the car? If it's before 2001 it has the round connector under the hood and it should be used per BMW official instructions. If a BMW has the round connector under the hood, it's the only one that is connector to all modules. Is BMW E46 320D 150HP from 2002. Him has OBD2 connector. My EDIABAS version is: 7.3.0 My ISTA-D version is: 4.19.40 My ISTA-P version is: 3.66.0.200 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Lowering g05 lci with ista | Zenel6GT | 3 | 42 |
25 minutes ago Last Post: Zenel6GT |
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,656 | 628,308 |
33 minutes ago Last Post: Sedoy |
|
FEM Not working with ENET but works wtih DCAN | armenh7 | 1 | 94 |
Yesterday, 21:44 PM Last Post: Marx |
|
ista 4.46 Standalone | kiranabc | 33 | 3,169 |
Yesterday, 19:51 PM Last Post: Siki78 |
|
e90 central locking not working | ELMEPRO | 9 | 155 |
Yesterday, 19:37 PM Last Post: Marx |
|
ista for use whit vcx se | db8000 | 0 | 48 |
Yesterday, 15:28 PM Last Post: db8000 |
|
AOS Ista possible to deactivate second check after scan? | RaoulK1998 | 17 | 380 |
Yesterday, 10:39 AM Last Post: RaoulK1998 |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 76 | 7,420 |
27-03-2024, 20:02 PM Last Post: Node |
|
Update ISTA at once 4.43.40 (ISTA Update Program) | charlesjyw | 34 | 6,501 |
27-03-2024, 10:39 AM Last Post: MINIGP1610 |
|
BMW ISTA-P Rheingold 69.0.200 (Torrent File) | carsoftcare | 1 | 138 |
26-03-2024, 12:09 PM Last Post: hlip |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content