Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Any way to remove not connected scr from ista?
|
19-01-2022, 22:11 PM,
Post: #1
|
|||
|
|||
|
Any way to remove not connected scr from ista?
hi,
is there a way to remove a disconnected scr from ista on a f10. the car has a software mod for adblue off. but when reading out with ista it shows the red scr ecu. is there any way to remove this? ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
19-01-2022, 22:46 PM,
Post: #2
|
|||
|
|||
|
RE: Any way to remove not connected scr from ista?
You can remove it with esys just vo code any module with tick in settings Update VCM after TAL execution
|
|||
|
|
|
20-01-2022, 08:18 AM,
Post: #3
|
|||
|
|||
|
RE: Any way to remove not connected scr from ista?
Can you describe it a little more? The DDE was patched for Adblue removal. And the Scr was disconnected. But Ista is still searching for the scr module. Maybe because of the VO? What needs to be changed to remove Scr from ISTA?
ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
|
|
|
20-01-2022, 08:49 AM,
Post: #4
|
|||
|
|||
|
RE: Any way to remove not connected scr from ista?
See picture and after that vo code any module you want
|
|||
|
|
|
20-01-2022, 09:06 AM,
Post: #5
|
|||
|
|||
|
RE: Any way to remove not connected scr from ista?
I know those checkboxes. The SCR was removed via chiptuning and scr plug is removed. Haven’t done anything with esys to this car.
VO is like it was. Do I need to change something there? ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
|
|
|
20-01-2022, 10:21 AM,
Post: #6
|
|||
|
|||
|
RE: Any way to remove not connected scr from ista?
Switch to eu5 emission option code will do the trick for you.
|
|||
|
|
|
20-01-2022, 10:32 AM,
(This post was last modified: 20-01-2022, 10:54 AM by tste1982.)
Post: #7
|
|||
|
|||
|
RE: Any way to remove not connected scr from ista?
Via option code or is there a typecode I have to change? Will it stay like this when I write the code to master and backup, even at the dealer when programming?
Tried it via SA 161 but didn't work. Ista still shows SCR as red icon, and when trying to program, it wants scr to be installed. Is there anything I'm doing wrong? ISTA 4.46.14, ISTA 4.46.11 SDP, ISTA-P 72.0, ISTA Launcher 1.46
E-Sys Launcher Pro 5.2.4 with E-Sys 22.10 Lenovo P14s |
|||
|
|
|
20-01-2022, 11:11 AM,
(This post was last modified: 20-01-2022, 11:12 AM by willisodhiambo.)
Post: #8
|
|||
|
|||
|
RE: Any way to remove not connected scr from ista?
People write solutions they have never tried and without understanding the problem. Can be very frustrating!!
Share your VO we see what needs doing. I think type code might have to be changed then ecus coded to remove that option |
|||
|
|
|
20-01-2022, 11:38 AM,
(This post was last modified: 20-01-2022, 11:39 AM by tste1982.)
Post: #9
|
|||
|
|||
RE: Any way to remove not connected scr from ista?
(20-01-2022, 11:11 AM)willisodhiambo Wrote: People write solutions they have never tried and without understanding the problem. Can be very frustrating!! Here is the FA, I tried to add 161, but didn't work for ista. One time it didn't show SCR but the next read out it came back. The US 535dx is the same like ECE 530dx. |