Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E61 - coding new SZL
03-02-2022, 08:09 AM,
Post: #11
|
|||
|
|||
RE: E61 - coding new SZL
I don’t expect people to remember the codes I’m just saying what error codes I have to help with diagnosis , sorry if I should of explained what those errors are rather than just numbers. My bad
Any idea what to do then??? the SZL unit is coded with the correct VIN , it keeps failing calibration, I’m basically stuck in what to do next Thanks |
|||
03-02-2022, 08:55 AM,
Post: #12
|
|||
|
|||
RE: E61 - coding new SZL
If previous poster was correct that you have invalid coding error that can mean one or both of two things:
1. You have not coded unit to a car properly. And I mean actual coding, not just VIN. 2. Unit is incompatible with that car. Give us part number of the new SZL and car VIN so we can check for 2. |
|||
03-02-2022, 09:56 AM,
Post: #13
|
|||
|
|||
RE: E61 - coding new SZL
Also try tool32 loading szl prg and running the job containing lenkwinkel_dsc_abgleichen. Job is valid when loading dsc prg of e90, so for szl might be slightly different, i dont remember now.
|
|||
03-02-2022, 10:00 AM,
(This post was last modified: 03-02-2022, 10:06 AM by Jasonpe61.)
Post: #14
|
|||
|
|||
RE: E61 - coding new SZL
(03-02-2022, 09:56 AM)elthox Wrote: Also try tool32 loading szl prg and running the job containing lenkwinkel_dsc_abgleichen. Job is valid when loading dsc prg of e90, so for szl might be slightly different, i dont remember now. Thanks I tried that with dsc_60PP lights go out for a few seconds then comes straight back (03-02-2022, 08:55 AM)Node Wrote: If previous poster was correct that you have invalid coding error that can mean one or both of two things: VIN : WBAPX72080CT99039 part number : 9204505 thanks |
|||
03-02-2022, 11:42 AM,
Post: #15
|
|||
|
|||
RE: E61 - coding new SZL
Correct prg is dsc_60.
Why you playing with tool32 if you dont know how to do this. Open ISTA+ and calibrate sensor |
|||
03-02-2022, 12:24 PM,
Post: #16
|
|||
|
|||
RE: E61 - coding new SZL
(03-02-2022, 11:42 AM)TomoR Wrote: Correct prg is dsc_60. Why does it say this error Requested control unit dsc_60 not found Control unit found dsc_60PP ? I’ve already tried calibrated with ISTa and it fails thanks |
|||
03-02-2022, 12:27 PM,
Post: #17
|
|||
|
|||
RE: E61 - coding new SZL
(03-02-2022, 10:00 AM)Jasonpe61 Wrote:(03-02-2022, 09:56 AM)elthox Wrote: Also try tool32 loading szl prg and running the job containing lenkwinkel_dsc_abgleichen. Job is valid when loading dsc prg of e90, so for szl might be slightly different, i dont remember now. Part seems to be correct. So then item 1 remains. You need to first code it properly using NCS Expert or ISTA-P. |
|||
03-02-2022, 12:41 PM,
Post: #18
|
|||
|
|||
RE: E61 - coding new SZL
(03-02-2022, 12:24 PM)Jasonpe61 Wrote:(03-02-2022, 11:42 AM)TomoR Wrote: Correct prg is dsc_60. This error you have on NCS Expert or in INPA? |
|||
03-02-2022, 13:06 PM,
Post: #19
|
|||
|
|||
RE: E61 - coding new SZL
(03-02-2022, 12:41 PM)TomoR Wrote:(03-02-2022, 12:24 PM)Jasonpe61 Wrote:(03-02-2022, 11:42 AM)TomoR Wrote: Correct prg is dsc_60. That error is in INPA |
|||
03-02-2022, 13:32 PM,
Post: #20
|
|||
|
|||
RE: E61 - coding new SZL
Bad or old script in INPA....but this is not now important...for this job INPA not need.
Like I sad before...and on this way have any time from first attempt done without any problem. 1.Flash szl with car vin 2.Code szl 3.With tool32 or ista+ senzor calibrate 4.Start system time that airbag lamp go off |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content