[paui]

Hello,

i have many weeks a problem with my Clone VAS5054A with vin recognition

it is a good clone with ori Firmware

Test on a VW Crafter 2008 

Windows 7 Professional 64bit
Odis-S-6.2 with Postsetup: 60200.103.280
no problems

Windows 10 Enterprise N LTSC 64bit
Odis-S-7.2.1 with Postsetup: 70201.101.1190
no VIN recognition

i attached 2 mcdserver logs from Odis-S

i have on both Systems Odis-E-12.2 installed
with same Postsetup: 120200.302.630
and only on the Windows 10 System has no VIN recognition
on Windows 7 System is all ok.

what is the Problem?

[jhon006]

postsetup: 70201.101.1190   is for TEST! No guarantee! For those who have experience and the ability to check in work...  you need to use this to work properly:  
ODIS Service 7.2.1 + Activations (cartechnology.co.uk)

[giannisyzfr1]

Hello,

i have many weeks a problem with my Clone VAS5054A with vin recognition

it is a good clone with ori Firmware

Test on a VW Crafter 2008 

Windows 7 Professional 64bit
Odis-S-6.2 with Postsetup: 60200.103.280
no problems

Windows 10 Enterprise N LTSC 64bit
Odis-S-7.2.1 with Postsetup: 70201.101.1190
no VIN recognition

i attached 2 mcdserver logs from Odis-S

i have on both Systems Odis-E-12.2 installed
with same Postsetup: 120200.302.630
and only on the Windows 10 System has no VIN recognition
on Windows 7 System is all ok.

what is the 

Hi sir,you must use mr fantomel instructions about your broblem,if you need help  for me,pm-i can help you.https://cartechnology.co.uk/showthread.php?tid=58980&highlight=odis

[paui]

I know that the postsetup: 70201.101.1190 is intended for test purposes. but even with original postsetup i have the same problems.

I don't need the ct loader.
I have ODIS 7.2.1 with a loader where I don't need activation for it.

I'm not installing ODIS for the first time, I've used every other version before.

i try the installation from fantomel but with my loader without activation.

[Tadk]

Before you start installing Odis from 5054 on Windows 10, you need to do the following:


1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[giannis20vt]

I am going to install ODIS 7.2.1 with clone 5054A to a clear Windows10 64bit laptop.
What should i do in order to success in installation ?

[justdiag]

https://cartechnology.co.uk/showthread.p...#pid513001

Read that and use the open patch from 7.2.1 thread.

[giannis20vt]

https://cartechnology.co.uk/showthread.p...#pid513001

Read that and use the open patch from 7.2.1 thread.

Thank you. Just to claryfy the procedure:

) install PDF viewer


2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++


5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1



 I must have the 6.2.0, not the 7.2.1  ?
Which exaclty is the Patch, could you tell my please ?
Then i specify the Postsetup from the 7.2.1

End of the procedure .

[ankur642patel]

both have same process
they using example of 6.2.0
that same process for 7.2.1

[giannis20vt]

What about the patch, which is the right one ?