[amstel]

Hi Guys,

Please can you advise how to change mileage on Ford Galaxy 2002?
I have UPA programmer.
My collegue ask me to do that but I have not seen his car yet.
Do I find eeprom in the cluster or I have to connect to processor?

[nizar-maoukil]

Hi to you should find eep in this dash and this is all information about the mileage

Car type: Ford Galaxy - 93c86 - 2002-2003 years
The mileage is stored in the next lines:
00F0: xx xx xx xx xx xx xx xx xx xx xx xx E7 95 E7 95
0100: E7 95 E7 95 E7 95 E7 95 E7 95 E7 95 xx xx xx xx
where the next bytes:
E7 95 - is a mileage

[johnnykayal]

You should desolder eeprom from dash and read it with upa before do that you have to take the old mileage to compare it with the dump when read it then you choose the mileage you want and put it if something goes wrong try swap

[amstel]

Thank you guys.

I got the cluster VDO today and I would like to connect it to 12V on the bench to check the current mileage.
Please can you show me where I should connect live and ground to the connector?
   
   

[turbocip]

You can change mileage over OBD2

[amstel]

You can change mileage over OBD2

Yes I do know that.

1.I need to Power Up the cluster on the bench.
Where to connect + and ground?

2.Can I have 157000 miles please.
Original was around 246680 miles.

[pietje001]

Please try and report..

[cuiuda]

You can change mileage over OBD2

...
1.I need to Power Up the cluster on the bench.
Where to connect + and ground?

...

Blue connector
pin 1 = ignition +12
pin 23 = +12
pin 24 = GND
pin 25 = K line