Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW G30 AdBlue OFF, DKOMBI2 coding?
|
22-03-2022, 14:02 PM,
Post: #1
|
|||
|
|||
|
BMW G30 AdBlue OFF, DKOMBI2 coding?
Can someone help me with Adblue coding in 2018 BMW G30? I deleted AdBlue from MD1CP002, now I have just an error in SCR module (broken tank), which gives me error od Dashboard (check engine light), intried to disconnect SCR module, but error is still present. I got an instructions to ser CC_AKTIVIERUNG_4 to „aus”, but I have just CC_MELDUNG_0004, when I set it to nicht_aktiv nothing changes. Still check engine on Dashboard.
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
22-03-2022, 14:39 PM,
Post: #2
|
|||
|
|||
RE: BMW G30 AdBlue OFF, DKOMBI2 coding?
(22-03-2022, 14:02 PM)Kamcio Wrote: Can someone help me with Adblue coding in 2018 BMW G30? I deleted AdBlue from MD1CP002, now I have just an error in SCR module (broken tank), which gives me error od Dashboard (check engine light), intried to disconnect SCR module, but error is still present. I got an instructions to ser CC_AKTIVIERUNG_4 to „aus”, but I have just CC_MELDUNG_0004, when I set it to nicht_aktiv nothing changes. Still check engine on Dashboard. You need tune your engine ecu BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
|
|
|
22-03-2022, 17:40 PM,
(This post was last modified: 23-03-2022, 04:53 AM by marcdts.)
Post: #3
|
|||
|
|||
RE: BMW G30 AdBlue OFF, DKOMBI2 coding?
(22-03-2022, 14:02 PM)Kamcio Wrote: Can someone help me with Adblue coding in 2018 BMW G30? I deleted AdBlue from MD1CP002, now I have just an error in SCR module (broken tank), which gives me error od Dashboard (check engine light), intried to disconnect SCR module, but error is still present. I got an instructions to ser CC_AKTIVIERUNG_4 to „aus”, but I have just CC_MELDUNG_0004, when I set it to nicht_aktiv nothing changes. Still check engine on Dashboard.pmed you |
|||
|
|
|
22-03-2022, 19:37 PM,
Post: #4
|
|||
|
|||
|
RE: BMW G30 AdBlue OFF, DKOMBI2 coding?
Have same problem here.... Engine lights comes on, because of communication error with SCR ECU,
|
|||
|
|
|
22-03-2022, 20:22 PM,
Post: #5
|
|||
|
|||
|
RE: BMW G30 AdBlue OFF, DKOMBI2 coding?
hi
hawe you ecu ori file? |
|||
|
|
|
23-03-2022, 03:34 AM,
Post: #6
|
|||
|
|||
|
RE: BMW G30 AdBlue OFF, DKOMBI2 coding?
You need to remove SCR from MD1 and disconnect SCR ECU (or take out fuse) also need to out some dtc from MD1. Optionally yoo can code out SCR from HU.
Extra DTCs to cut from MD1 2c3000 2720 29fc 29fd 29FB00 CD9611 - U010E CD9612 - U010E CD9613 - U010E |
|||
|
|
|
23-03-2022, 08:01 AM,
(This post was last modified: 23-03-2022, 08:03 AM by Kamcio.)
Post: #7
|
|||
|
|||
RE: BMW G30 AdBlue OFF, DKOMBI2 coding?
(22-03-2022, 20:22 PM)chipauto Wrote: hi Here you have my original and model files. (in attachment) (23-03-2022, 03:34 AM)ziggy Wrote: You need to remove SCR from MD1 and disconnect SCR ECU (or take out fuse) also need to out some dtc from MD1. Optionally yoo can code out SCR from HU. I did it like that, but when I disconnect SCR car turns on ignition and immediately turns off in 1sec, car won't start. One post above you have my files from MD1 |