[Fx82]

Actually I used the installer.
On the first page it say "sdp is needed". Ok where to get that file (SDP_4.34.30.7z) or can I create it myself from a system where it is already installed?

[hashtagmaster]

Actually I used the installer.
On the first page it say "sdp is needed". Ok where to get that file (SDP_4.34.30.7z) or can I create it myself from a system where it is already installed?

do you mean the one in his memory?

[jogi8850]

dear members, every releases ista same link!

and i have no license key!
please ask in forum:  ISTA Standalone Licenserequest!!

Thanks for Help and happy weekend

[bereic]

@jogi8850

do you know why also in this release the SSP's for front and taillights on a new X3 G01 LCI are not available?
My dealer checked for me before last week in this same version and there they were available. But here not.

Thank you

[Fx82]

Actually I used the installer.
On the first page it say "sdp is needed". Ok where to get that file (SDP_4.34.30.7z) or can I create it myself from a system where it is already installed?

do you mean the one in his memory?

Yes exactly.

[bart_tech]

Hi Guys, can some one share a link to Ista 4.32.15 please ? Tried one but fails CRC check on Global file

Thanks !!!

[iDIDNTdoIT]

Need bit of help, if possible.
  Have version 4.32.15 installed, it worked fine for a few days and than all of a sudden i started getting the DPAD error. The PC is connected to the ICOM but will not read the vehicle. I have spent a few hours trying to find a solution, and nothing seemed to work. I have tried direct connection, local network, ethernet as preferred yes and no. Entering the 17 digit VIN, will ID car, and once in a while, will recognize car and works, more times than not will fail with DPAD error, or all modules will be red.
 
AT the shop we have another laptop and ICOM and started doing the same thing, on a slightly older version. But, if we pay and use original software on yet another PC, the ICOM works fine, detects cars no problem and everything works at it should, diagnostic and programming. Anyone has any idea why the ICOM's refusing to work on the standalone versions?

EDIT: so spent a few more hours and seems like was a problem with connection between PC and ICOM. Resetting network didn't work, reset card and so didn't work. The tool will show up on Itoolradar, at first didn't say free, but even after it was free wouldn't connect. I tried a USB network adapter and didn't work either. Uninstalled ISTA, reset network, ccleaner, delete registry entries and some bmw stuff left over, re-installed ISTA (Older Sedoy version) and made sure TCP-IPv4 was set to HDCP and voila. I didn't connect to a vehicle yet, but no longer get DPAD error and can see the COMM LED flashing looking for a vehicle. On this laptop, something got screwy with network/ISTA.

[Sedoy]

Hi Guys, can some one share a link to Ista 4.32.15 please ? Tried one but fails CRC check on Global file

Thanks !!!

File is ok, redownload it.

[bart_tech]

Hi Guys, can some one share a link to Ista 4.32.15 please ? Tried one but fails CRC check on Global file

Thanks !!!

File is ok, redownload it.

Thanks Sedoy, got it to work now. Any idea where to find version with SDP programming enabled please?

[Twointje]

Actually I used the installer.
On the first page it say "sdp is needed". Ok where to get that file (SDP_4.34.30.7z) or can I create it myself from a system where it is already installed?

do you mean the one in his memory?

Yes exactly.

If you asked the download link to jogi8850 why did you not download the complete ista 4.34.30 folder  ? Everything that you need is inside that folder.