Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
2010 mondeo tdci 1.8 wont crank
17-01-2022, 20:09 PM,
Post: #1
|
|||
|
|||
2010 mondeo tdci 1.8 wont crank
Can someome please help me with this fault 2010 1.8 tdci
This car was parked as normal about a week ago and the next morning the car would not start.Dash would light up as normal but no crank.The two fault codes i am getting are P2505 and PA09. I have checked the loom to the injectors and,from ign sw to start relay and from start relay to ecu all ok I can get it to crank by shorting the 2 big pins on start relay.If I have a cam belt problem will this stop it from cranking. I will be grateful for any help Regards Larry. |
|||
17-01-2022, 21:39 PM,
Post: #2
|
|||
|
|||
RE: 2010 mondeo tdci 1.8 wont crank
Check all +12V (INput) and all grounds to the ECU.
|
|||
Reputation: +1 - coder [+1] | |||
17-01-2022, 21:50 PM,
(This post was last modified: 17-01-2022, 21:52 PM by Clusters.)
Post: #3
|
|||
|
|||
RE: 2010 mondeo tdci 1.8 wont crank
hi
you have a power supply problem and it looks like your ecu is dead |
|||
Reputation: +1 - coder [+1] | |||
05-04-2022, 07:09 AM,
Post: #4
|
|||
|
|||
RE: 2010 mondeo tdci 1.8 wont crank
Will say that your ecu is dead or as often seen (when car was in front accident before) wiring is cut. Guys that repair cars dont heistage to put wiring back in its place and it rubs some metal and this happens - had few of same issues this year already. Or some animal had it for dinner.
|
|||
25-05-2022, 12:47 PM,
(This post was last modified: 25-05-2022, 12:49 PM by Kaja.)
Post: #5
|
|||
|
|||
RE: 2010 mondeo tdci 1.8 wont crank
(17-01-2022, 21:50 PM)shasse Wrote: hi How I can check if Ecu is dead? (05-04-2022, 07:09 AM)alpntrb Wrote: Will say that your ecu is dead or as often seen (when car was in front accident before) wiring is cut. Guys that repair cars dont heistage to put wiring back in its place and it rubs some metal and this happens - had few of same issues this year already. Or some animal had it for dinner. I have checked the wiring harness everything is in order |
|||
22-01-2023, 14:26 PM,
Post: #6
|
|||
|
|||
RE: 2010 mondeo tdci 1.8 wont crank
check harness under left headlamp, very common to corrode
|
|||
23-01-2023, 01:04 AM,
Post: #7
|
|||
|
|||
RE: 2010 mondeo tdci 1.8 wont crank
Also, if this is a blade key vehicle. check to make sure after key is turn, output voltages are correct. You will need diagram to identify which is which and what's connecting with the turn of the key.
Thanks and Rep Appreciated!
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Fiesta 2011 1.6 TDCi Starter / ECU Fault | JNC | 7 | 88 |
28-05-2024, 22:23 PM Last Post: JNC |
|
FORD MONDEO VBF files | rasmoka | 1 | 222 |
20-02-2024, 18:06 PM Last Post: fordmidabil |
|
Ford Mondeo mk5 RF Transmitter | canisha | 0 | 153 |
03-10-2023, 20:45 PM Last Post: canisha |
|
Need update soft for TCM Ford F150 2010 year | dfb | 1 | 323 |
01-08-2023, 21:13 PM Last Post: Autotronixx |
|
Ford Mondeo service history | teka2 | 0 | 284 |
29-05-2023, 13:57 PM Last Post: teka2 |
|
FORD FIESTA VI 1.6 TDCI (95HP) no start | emifive | 10 | 917 |
21-02-2023, 07:54 AM Last Post: Tracshan |
|
Ford Mondeo Mk4 1.6 TDCi 2013 year problem with HS CAN | karmazyn | 3 | 406 |
20-01-2023, 09:12 AM Last Post: KeeleyKaayz |
|
Ford Focus 2.0 Tdci Sid206 2009 need help | Patuk | 0 | 232 |
11-12-2022, 14:31 PM Last Post: Patuk |
|
Ford Mondeo Update needed 2.2 TDCI 175HP | Carremapper | 0 | 316 |
10-07-2022, 13:35 PM Last Post: Carremapper |
|
Ford Mondeo MK3 used PCM renew | alexturbo | 2 | 478 |
04-06-2022, 09:09 AM Last Post: alexturbo |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content