[Jacce75]

1280 tested on
- SKODA OCTAVIA Combi (5E5) 2.0 TDI 4x4 2018, everything works perfect

Big THX to Tadk! Great job !!

[jhon006]

1280 test on Audi a4 2010 1.8 tfsi, Vw Polo 2017 1.4 tsi all Ok passthu

[billyleon]

drive Thanks Tadk for your good work!!! For me warks ok!!

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.1350_test


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 9.1.0, Postsetup 90100.207.230.

Don't spam thread and PM (Private Message) me for password.

Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980

Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[hestech]

1280 working OK with A4 2018

[jhon006]

1350 tested on vw transporter 2018 2.0 CR CXGB all ok passthru, offline

[Jacce75]

1280 tested on
- VW Passat B8 2020 facelift 1.5 DPCA, works perfect.

This time I have spent 6 long hours updating OCU and MIB3 on this car. Online login was OK and even DSS login to. I allso managed to unlock and activate SWaP for satnav which was lost during update. I was using ODIS 7.2.1 with VX MultiDiag tool running VAS 6154 driver.
OCU update required at minimum ODIS 9.0.1 and baseline didb_GFS-v 2.44.1. This PostSetup 1280 release contains 2.45.2 from ODIS 9.x.x and worked just perfect with ODIS 7.2.1.
Now MIB3 has new look and fresh graphics. Even album covers from Spotify is working.
Really nice job Tadk!! Got to install v1350 ASAP.

[pendragon1]

1350 test on Golf Mk6
all works fine
many thanks to Tadk

[cicoe]

All ok, tested on TT mk3 and Golf 7.5

[Jacce75]

1350 tested on
- VW PASSAT Variant (365) 2.0 TDI 2012, works perfect.

---

1350 tested on
- AUDI Q7 (4L) 3.0 TDI 2010, works great.