[screwdriver]

Hello,


Like in the subject i got this airbag modul with National CR16 44PLCC inside.

I got car prog and would like to know how to connect the modul to read the corrupted files. 
Maybe something more needed? Please let me know.

With best regards.

[al70]

what year is the car ?

[screwdriver]

Mate it is 09.2000

[al70]

here's a link to connection

[screwdriver]

thanks! But this Modul got CR16 44PLCC Chip and not the 80 Pin Qfp...

[al70]

have you tried by obd, sometimes with carprog it takes 2 or 3 attempts before it connects

[mbedv]

If you have the control unit on the table, supply it with voltage and read it out with K Line. Test it with Diagnosis on the table if it talks to you and then reset it with Carprog. Carprog is always a bit bitchy like al70 had already written!

65535 - Defective control unit can be deleted without any problems

I think you have a 50 pin connector yellow

K-line = Pin 5
GND = Pin 6,
+12V = Pin 8

[screwdriver]

Hello mbedv and thanks for your answer! But no, ive got the one with 84pin yellow socket.
Could you provide me the pinout on bench for that one?

Thanks in advance!

[mbedv]

84 PIN

K-line = Pin 67
GND = Pin 66
+12V = Pin 65

[al70]

Try this connection

---

Try this connection