Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

OriginaL/Clone PCMFLASH Questions/Answers
26-03-2022, 19:49 PM,
Post: #11
RE: OriginaL/Clone PCMFLASH Questions/Answers
Genuine pcm flash and Scanmatik and Module 71 EDC17CP49 on bench R/W work perfect with checks etc.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 3 users say Thank You to m1ke for this post
31-03-2022, 14:00 PM,
Post: #12
RE: OriginaL/Clone PCMFLASH Questions/Answers
Genuine pcm flash and Scanmatik SM2- Module 84
delphi DCM6.2 skoda 1.6l TDI CXXB 04L906056CL
VR + obd flash, all OK

LSalt100
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 3 users say Thank You to lsalt100 for this post
10-04-2022, 08:32 AM,
Post: #13
RE: OriginaL/Clone PCMFLASH Questions/Answers
Genuine Scanmatik Pro 2.
Genuine PCM flash with module 71.
Only had 1 brick after erase and this was due to a faulty USB cable, so please, use a high quality USB cable.
100% confidence in this setup.

If I have helped you out, please drop us a thanks on the button below. Cheers.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to PsiDOC for this post
13-04-2022, 10:28 AM,
Post: #14
RE: OriginaL/Clone PCMFLASH Questions/Answers
For now, is working perfectly, I have clone 67 in 1

The only thing that dont works is if I remove tprot, Im not able to read the ecu from OBD cable. Only chance to read and write is on the bench.

Also, when I try to flash, there is a option in pcm to remove tampering protect, If I check that, the programs outputs an error
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 6 users say Thank You to youberser for this post
13-04-2022, 10:38 AM,
Post: #15
RE: OriginaL/Clone PCMFLASH Questions/Answers
(13-04-2022, 10:28 AM)youberser Wrote:  For now, is working perfectly, I have clone 67 in 1

The only thing that dont works is if I remove tprot, Im not able to read the ecu from OBD cable. Only chance to read and write is on the bench.

Also, when I try to flash, there is a option in pcm to remove tampering protect, If I check that, the programs outputs an error

Post up your solution to that ecu and tell us which one please

[Image: OxNUyuy.jpg]All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
Quote this message in a reply
[+] 1 user says Thank You to ROD-BENDERS for this post
20-04-2022, 19:32 PM,
Post: #16
RE: OriginaL/Clone PCMFLASH Questions/Answers
(13-04-2022, 10:38 AM)ROD-BENDERS Wrote:  
(13-04-2022, 10:28 AM)youberser Wrote:  For now, is working perfectly, I have clone 67 in 1

The only thing that dont works is if I remove tprot, Im not able to read the ecu from OBD cable. Only chance to read and write is on the bench.

Also, when I try to flash, there is a option in pcm to remove tampering protect, If I check that, the programs outputs an error

Post up your solution to that ecu and tell us which one please

I've attached the file with the files I'm working, After flashing the tprot off file on bench, the car runs fine, but I can't read/write from OBD port (Tried with PCM flash and MPPS)

I will attach a photo of the error that PCM Flash outputs (when I tick the option to remove tampering protection before writing any file on the ecu) ASAP


Attached Files
tprot.zip
File Type: .zip
Downloaded: 93 times
Size: 3.09 MB

Reputation: +3 - ROD-BENDERS [+1] , raffy haddad [+1] , abdoo [+1]
Quote this message in a reply
[+] 5 users say Thank You to youberser for this post
21-04-2022, 19:25 PM,
Post: #17
RE: OriginaL/Clone PCMFLASH Questions/Answers
(20-04-2022, 19:32 PM)youberser Wrote:  
(13-04-2022, 10:38 AM)ROD-BENDERS Wrote:  
(13-04-2022, 10:28 AM)youberser Wrote:  For now, is working perfectly, I have clone 67 in 1

The only thing that dont works is if I remove tprot, Im not able to read the ecu from OBD cable. Only chance to read and write is on the bench.

Also, when I try to flash, there is a option in pcm to remove tampering protect, If I check that, the programs outputs an error

Post up your solution to that ecu and tell us which one please

I've attached the file with the files I'm working, After flashing the tprot off file on bench, the car runs fine, but I can't read/write from OBD port (Tried with PCM flash and MPPS)

I will attach a photo of the error that PCM Flash outputs (when I tick the option to remove tampering protection before writing any file on the ecu) ASAP

BMW with pcmflash via OBD? I believe that you are dreaming
Quote this message in a reply
21-04-2022, 21:17 PM,
Post: #18
RE: OriginaL/Clone PCMFLASH Questions/Answers
My opinion, obd reading/writing with clones on cars after 08/09 especially vag cars is like throwing a round dice, if an ECU is opened properly, reading directly from the board will always be my choice, I get panic attacks when I plug my kess clone in for a virtual write , goodluck
Reputation: +1 - BS68 [+1]
Quote this message in a reply
[+] 6 users say Thank You to al70 for this post
21-04-2022, 21:42 PM,
Post: #19
RE: OriginaL/Clone PCMFLASH Questions/Answers
I got ori pcmflash, I have done many bmw edc17cp45 ,c41, c50 edc17 vag ,renault, opel edc17,bench mode protocol 71 , many mazda SH ecu obd r/w crypto and no crypto and many more ecu it's good tool but not cover all ecu so I got AT too
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 1 user says Thank You to fifii69 for this post
23-04-2022, 22:45 PM,
Post: #20
RE: OriginaL/Clone PCMFLASH Questions/Answers
PcmFlash Ori.

Scanmatik2 Pro and Openport 2.0.

Modules: 48, 50, 57, 58, 62, 71, 77

Tested all with many Ecu´s OBD and Bench Mode, pcr2.1 unlock R/W , clone edc16 and edc17. Works perfect.

Very good support from the owner also.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to JorBo for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? ROD-BENDERS 127 17,061 10 hours ago
Last Post: weinerbarn
ZTAudi audi a5 CCWA original please DavidT 1 12 Yesterday, 20:55 PM
Last Post: lsdlsd88
  renault trafic3 clone ecu Albert-M 2 47 26-03-2024, 11:47 AM
Last Post: JV22
  I'm looking for the original map for ASTRA H 1,7 CDTI 100 KM 2005 roanoke 4 85 21-03-2024, 20:53 PM
Last Post: martink550
JFiat Help original file Punto Evo 13mjet 8DF2 bmw320d 1 56 20-03-2024, 16:32 PM
Last Post: gkogkolos
ZTAudi 06A906033KQ Original chrisi1909 0 55 18-03-2024, 22:22 PM
Last Post: chrisi1909
  MED17.5.2 Clone problem 3inferno3 8 230 18-03-2024, 15:07 PM
Last Post: 3inferno3
  audi a6 2005 original file edc16 BoNzO 1 82 17-03-2024, 06:36 AM
Last Post: YGRemaps
  Fiat Egea-Tipo 1.3 Multijet Original File ottway 0 55 14-03-2024, 05:42 AM
Last Post: ottway
  BOSCH 0281 014 202 LOOKING FOR ORIGINAL FILE hicazkar 2 82 13-03-2024, 14:28 PM
Last Post: hicazkar

Forum Jump:


Users browsing this thread:
9 Guest(s)

Return to TopReturn to Content