[CID_Dave]

Hi, 

I have a C3 multiplexer, only need to diagnose my own van which is W639 2004. 

I was told in another thread that 09/2014 is the best version to use with C3, does anyone have a link for a VM or Acronis image for this please?

[evgenijj]

Here.
111111111111111111111111111111

[CID_Dave]

Thank you, unfortunately the link is down.

Here.
111111111111111111111111111111

[CID_Dave]

I have found a 2012 image which seems to be working well, but it does not include the keygen.

The Xentry keygen from the how to install thread works. But it looks like I also need DAS and WIS keys to get everything working.

Can anyone help please?

[gcs190]

Publish here the Lan-Id and the Hw-id to be able to generate them, tomorrow I can provide them to you if you have not obtained them before from another colleague

[CID_Dave]

Thank you, I did actually find the keygens on another thread on the forum which is here.

https://cartechnology.co.uk/showthread.php?tid=5933

[CID_Dave]

Hi all,

I was able to get an 01.2014 image that's working well. It's from a thread on here actually but the link in the original thread is dead. I can re-upload the image if it would be useful for someone?

Now I am facing a new issue. I recently bought this W639 Vito 2004 and it seems to have had a replacement EZS, there is an old one in the glovebox and EZS VIN and coding options did not match the car.

I was able to change the coding options with DAS developer mode and the ESP and ABS lights on the dash went off.

But I still have one left for SRS, and the code is because the VIN does not match the EZS.
I tried to change the VIN in EZS but it was refused, from reading in other places its locked after a certain number of starts.

What are my options? Is there any possibility to change the EZS VIN with DAS/Xentry or can it only be done with EEPROM methods? Would the offline coding patches from this forum help?
DAS directs you to online SCN coding which obviously doesn't work.

Thanks

[CID_Dave]

I'm answering all my own questions here

You can't change the VIN in the EZS with DAS/Xentry. Maybe through SCN, I did find a solution for SCN offline on the forum but did not know what information to enter.

I was able to find the option to turn off VIN checking in the SRS, so now I have no warning lights on the dash at least even if the VIN in my EZS is still wrong.