Possibly Related Threads…

***user_530d*** · 15-05-2022, 10:31 AM,

Here is the right tal for flashing your zgw.

***alsamaraee*** · 15-05-2022, 10:41 AM,

(15-05-2022, 10:31 AM)user_530d Wrote: Here is the right tal for flashing your zgw.

Thanks, but I think the hwel in your tal is 00000C95 instead of 00000926

***user_530d*** · 15-05-2022, 10:59 AM,

Ohh, sorry here is the correct one.

***alsamaraee*** · (This post was last modified: 15-05-2022, 11:45 AM by alsamaraee.)

Thank you @user_530d

Here is my zgw now.
Will try now put it back in the car and code all ecu.

Still same, now I can't see the nbt, dkombi

***user_530d*** · 15-05-2022, 12:13 PM,

Do you have removed MOST LWL from ZGW? You must do that. Then connect the ends together. NBT EVO is now the MOST Master not more the ZGW. You must also relearn Most bus.

***alsamaraee*** · 15-05-2022, 12:44 PM,

Most loop disconnected from zgw and connected together. How to relearn most?

***user_530d*** · 15-05-2022, 12:47 PM,

If you have Most error in ISTA you can do with ISTA. If you have no Most error and Kombi/HU is ok you don’t need relearn.

***alsamaraee*** · 15-05-2022, 13:39 PM,

(15-05-2022, 12:47 PM)user_530d Wrote: If you have Most error in ISTA you can do with ISTA. If you have no Most error and Kombi/HU is ok you don’t need relearn.

Can see hu now not the kombi. All flexray ecu disappeared. Tried to initialize flexray but no communication with icm sad

***user_530d*** · 15-05-2022, 14:15 PM,

Have you coded hu with F10 and build date >7/13 and open up all Flexray ports with TOOL32 than you can see ICM. Also can help to reset/restart ZGW with ISTA.

***alsamaraee*** · 15-05-2022, 14:29 PM,

(15-05-2022, 14:15 PM)user_530d Wrote: Have you coded hu with F10 and build date >7/13 and open up all Flexray ports with TOOL32 than you can see ICM. Also can help to reset/restart ZGW with ISTA.

Not sure now what build date is the hu coded now. Will make sure it is 0713. Did reset restart zgw several time with ista actually after made flexray initializing lost communication with icm.
Never used tool32. Is it possible with ista and esys?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	G01 2019 X3 - ATM Replacement/Coding Help Needed	jchisholm17	10	255	5 hours ago Last Post: jchisholm17
	G82 rear tail lights CSL retrofit	Sauron	7	588	Yesterday, 12:26 PM Last Post: SANYA
	Kafas issue aftrer ACC Retrofit	It3_Magic	12	305	17-04-2024, 15:07 PM Last Post: user_530d
	Neck warmer retrofit	Just2fast5	5	326	17-04-2024, 11:20 AM Last Post: Spirit5676
	TMS FRM3 F10 Coding issue	mj_mj_mj	17	1,887	16-04-2024, 09:30 AM Last Post: user_530d
	ID4 evo to ID6 Evo full retrofit, ATM issues 03178A	mitch32	1	134	15-04-2024, 17:52 PM Last Post: mitch32
	Bmw G31 retrofit Mgu id7 atm problem	intranet	19	2,245	15-04-2024, 09:21 AM Last Post: evaldazj
	BMW F10 RHD to LHD coding?	morto	12	1,465	13-04-2024, 17:32 PM Last Post: pablito94
	BMW E84 Cruise control retrofit not workig	Alyn546	4	203	12-04-2024, 14:23 PM Last Post: DieStream
	E60 EVO OABR to OBD Coding	painsage	13	463	12-04-2024, 10:54 AM Last Post: painsage

Contact Us