[bingo1309]

This is the Latest Firmware to VX-DIAG for using ISTA latest version which is currently 4.35.20 and it works for this ISTA version also

Steps to carry out:

1. Make sure your VX manager is to the latest version 

2. Make sure the DOIP Firmware is v1.9.0 

3. Make sure the VCI Firmware is v1.9.1.0

4. Update the License and make sure the days are shown as 60 days 

5. Download the files from below attached link and install both of them.

6. That's it. Enjoy the Latest ISTA version. 

Any Questions Please ask your queries below. If it helped you or liked it. please Thank Me and Rep+1 me

[baba]

Are the two icom firmware versions original or modified for VX?

I don't see anything about this on the official site.
Well done for this information.

[dfb]

4.35.40
all did like write there ) no working. still firmware!!!

[bingo1309]

4.35.40
all did like write there ) no working. still firmware!!!

I just said upto 4.35.20. Which is tried and tested. I tried on 35.20 works perfect. as this one is new and it's 4.35.40. May be needs new firmware. Or vx diag has to update vci or vcx internal firmware first. then can use above link software to make it work.

[dfb]

4.35.40
all did like write there ) no working. still firmware!!!

I just said upto 4.35.20. Which is tried and tested. I tried on 35.20 works perfect. as this one is new and it's 4.35.40. May be needs new firmware. Or vx diag has to update vci or vcx internal firmware first. then can use above link software to make it work.

any idea where i can take 4.35.20 with RU lang?

[StarmanBL]

Thank You for this, work perfect on 4.34.40

[foxportal]

4.35.40
all did like write there ) no working. still firmware!!!

I just said upto 4.35.20. Which is tried and tested. I tried on 35.20 works perfect. as this one is new and it's 4.35.40. May be needs new firmware. Or vx diag has to update vci or vcx internal firmware first. then can use above link software to make it work.

any idea where i can take 4.35.20 with RU lang?

[Abou Jambo]

4.35.40
all did like write there ) no working. still firmware!!!

I just said upto 4.35.20. Which is tried and tested. I tried on 35.20 works perfect. as this one is new and it's 4.35.40. May be needs new firmware. Or vx diag has to update vci or vcx internal firmware first. then can use above link software to make it work.

any idea where i can take 4.35.20 with RU lang?

I was the one who supplied VXdiag with the solution for firmware issue and aksed for a bmw VCX as gift since i spent couple of days to find solutiom they answered its too expensive 

U need to install latest ICOM update version from AOS and all will work

[bingo1309]

4.35.40
all did like write there ) no working. still firmware!!!

I just said upto 4.35.20. Which is tried and tested. I tried on 35.20 works perfect. as this one is new and it's 4.35.40. May be needs new firmware. Or vx diag has to update vci or vcx internal firmware first. then can use above link software to make it work.

any idea where i can take 4.35.20 with RU lang?

I was the one who supplied VXdiag with the solution for firmware issue and aksed for a bmw VCX as gift since i spent couple of days to find solutiom they answered its too expensive 

U need to install latest ICOM update version from AOS and all will work

for the next newer ISTA please share the ICOM updater version msi drivers thank you

[alexturbo]

Can I have the link for 4.35.40?