Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA Standalone / Standard Tools / PSdZData_Lite - last [MEGA]
03-06-2022, 14:08 PM,
Post: #921
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(03-06-2022, 10:04 AM)tonemoz Wrote:  Is it possible to flash HUH via http with standalone? Using a router nbt/evo takes 5 hours to update but I can flash much quicker with esys via http.

I have flash complete Car with NBT-Evo with Standalone and ENET in 60 minutes.

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
03-06-2022, 14:34 PM,
Post: #922
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(03-06-2022, 14:08 PM)Sedoy Wrote:  
(03-06-2022, 10:04 AM)tonemoz Wrote:  Is it possible to flash HUH via http with standalone? Using a router nbt/evo takes 5 hours to update but I can flash much quicker with esys via http.

I have flash complete Car with NBT-Evo with Standalone and ENET in 60 minutes.

Must admit, haven't tried with enet, I'm using icom next. Same set up flashes with esys fine.
Quote this message in a reply
03-06-2022, 17:37 PM,
Post: #923
XZBMW  RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(03-06-2022, 14:08 PM)Sedoy Wrote:  
(03-06-2022, 10:04 AM)tonemoz Wrote:  Is it possible to flash HUH via http with standalone? Using a router nbt/evo takes 5 hours to update but I can flash much quicker with esys via http.

I have flash complete Car with NBT-Evo with Standalone and ENET in 60 minutes.

Sedoy did you also used Netsetman?

If I help you, please push thanks and reputation.  under
Quote this message in a reply
03-06-2022, 17:39 PM,
Post: #924
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(03-06-2022, 17:37 PM)Twointje Wrote:  
(03-06-2022, 14:08 PM)Sedoy Wrote:  
(03-06-2022, 10:04 AM)tonemoz Wrote:  Is it possible to flash HUH via http with standalone? Using a router nbt/evo takes 5 hours to update but I can flash much quicker with esys via http.

I have flash complete Car with NBT-Evo with Standalone and ENET in 60 minutes.

Sedoy did you also used Netsetman?

Yes, with Tftpd64 as DHCP-Server. That was also available in folder Tools in DHCP-Server.7z.

iLean offline license (PM)
FeatureCodes CarPlay (PM)
FSC-Generator
Quote this message in a reply
03-06-2022, 18:31 PM,
Post: #925
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(03-06-2022, 17:39 PM)Sedoy Wrote:  
(03-06-2022, 17:37 PM)Twointje Wrote:  
(03-06-2022, 14:08 PM)Sedoy Wrote:  
(03-06-2022, 10:04 AM)tonemoz Wrote:  Is it possible to flash HUH via http with standalone? Using a router nbt/evo takes 5 hours to update but I can flash much quicker with esys via http.

I have flash complete Car with NBT-Evo with Standalone and ENET in 60 minutes.

Sedoy did you also used Netsetman?

Yes, with Tftpd64 as DHCP-Server. That was also available in folder Tools in DHCP-Server.7z.

Will test with virtual server instead of actual router. 
Quote this message in a reply
20-06-2022, 08:18 AM,
Post: #926
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(03-06-2022, 17:39 PM)Sedoy Wrote:  
(03-06-2022, 17:37 PM)Twointje Wrote:  
(03-06-2022, 14:08 PM)Sedoy Wrote:  
(03-06-2022, 10:04 AM)tonemoz Wrote:  Is it possible to flash HUH via http with standalone? Using a router nbt/evo takes 5 hours to update but I can flash much quicker with esys via http.

I have flash complete Car with NBT-Evo with Standalone and ENET in 60 minutes.

Sedoy did you also used Netsetman?

Yes, with Tftpd64 as DHCP-Server. That was also available in folder Tools in DHCP-Server.7z.

Can you install it an use it, or must you setup first? And if you want programming with Enet cable must you start first DHCP Server and then connect Enet cable to the car. And when your finished closed DHCP Server?


Quote this message in a reply
21-06-2022, 05:26 AM,
Post: #927
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Please can anyone advise if ISTA 4.35.4x provides July 2022 update or is it still Mar 2022?
I couldnt find any change log for this one.
Quote this message in a reply
21-06-2022, 05:34 AM,
Post: #928
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Is still 03-22...
Quote this message in a reply
[+] 1 user says Thank You to katerle for this post
21-06-2022, 07:14 AM,
Post: #929
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
Software 22-07-510 will come with ISTA 4.36.1x by 29.06.2022
Quote this message in a reply
[+] 1 user says Thank You to inspi1981 for this post
21-06-2022, 08:38 AM,
Post: #930
RE: ISTA Standalone / Standard Tools / PSdZData_Lite - latest [MEGA]
(21-06-2022, 07:14 AM)inspi1981 Wrote:  Software 22-07-510 will come with ISTA 4.36.1x by 29.06.2022

Will there be SDP data in this update? Because now Im using 4.31 with its own sdp and I'm willing to update mostly for the newer program database.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA 4.47.2x I-LEVEL+OVERVIEW AutoExe3219 0 6 11 minutes ago
Last Post: AutoExe3219
XZBMW ISTA+ 4.47.2x Install Files - MEGA shawnsheridan 7 657 1 hour ago
Last Post: shawnsheridan
  v4.47.20_PSdZData - Full Version - MEGA luntik 0 80 Today, 01:04 AM
Last Post: luntik
XZBMW ISTA+ 4.47.1x Install Files - MEGA shawnsheridan 42 4,147 Yesterday, 19:21 PM
Last Post: 2013m5
XZBMW Ediabas 7.6.0 - BMW standart tools 2024 duke99 11 1,070 Yesterday, 16:15 PM
Last Post: Sedoy
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 108 36,787 Yesterday, 08:02 AM
Last Post: hashtagmaster
XZBMW PSdZData 4.47.20 Lite Version - MEGA charlesjyw 0 95 04-05-2024, 23:29 PM
Last Post: charlesjyw
  ista 4.46 Standalone kiranabc 104 12,965 04-05-2024, 18:43 PM
Last Post: kiranabc
  ISTA 4.47 test plan and error delete not available bmwm3power 7 470 04-05-2024, 15:49 PM
Last Post: bmwm3power
XZBMW CZ_SQLiteDBs_4.46.21 on MEGA smahel 2 132 04-05-2024, 07:49 AM
Last Post: smahel

Forum Jump:


Users browsing this thread:
4 Guest(s)

Return to TopReturn to Content