Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ E70 CCC update failed with ISTA-P and ICOM A+B
02-07-2022, 20:48 PM,
Post: #1
XZBMW  E70 CCC update failed with ISTA-P and ICOM A+B
Hello,

I have an issue, ISTA-P failed to update my CCC and now idrive is stuck on BMW logo.

I have a genuine ICOM Next A unit, but the B unit is a china clone

It works on first modules with "DIAGBUS" mode, but BO and CCC-A on MOST fails

It seems there is random communication errors...
coAPI7444 once, coAPI 7047, coAPI 7922 ...

always with "communication problems"

I tried to flash BO with WinKFP (after configuring it on MOST async b625)  in expert mode following tutorials, and it also failed at 16% ...

Any help would be very appreciated.
I guess it must be flashed with ICOM A+B and can't be done with K+DCan usb as it is on MOST... ?

Thank you


Edit : retried WinKFP and it failed at 18% now... I will try another network cable just in case... but everything else than MOST worked for update...


Attached Files Thumbnail(s)
       
02-07-2022, 21:54 PM,
Post: #2
RE: E70 CCC update failed with ISTA-P and ICOM A+B
CCC is a nightmare in general sad

It's also a rule of thumb, that if you have ICOM Next A you should use "black" MOST adapter, not the one with orange cap. If you don't have any MOST ring errors, then seems that MOST adapter might be a problem in your case.

At this stage I would give it a try with K+D Can. It is not advised due to MOST, but some claim that they had sucess with this set-up. Personally I've never tried, but you don't have much to loose here.

You can always look for CCC repair DVD, there are plenty of intructions how to do it. Fairly easy process.
[+] 1 user says Thank You to diagso for this post
02-07-2022, 22:02 PM,
Post: #3
RE: E70 CCC update failed with ISTA-P and ICOM A+B
try with icom via base setting without most
[+] 1 user says Thank You to elthox for this post
02-07-2022, 22:39 PM,
Post: #4
RE: E70 CCC update failed with ISTA-P and ICOM A+B
I will try thank you
03-07-2022, 08:16 AM,
Post: #5
RE: E70 CCC update failed with ISTA-P and ICOM A+B
In progress
Thanks


Attached Files Thumbnail(s)
   
03-07-2022, 09:05 AM,
Post: #6
RE: E70 CCC update failed with ISTA-P and ICOM A+B
(03-07-2022, 08:16 AM)Orphee Wrote:  In progress
Thanks

Good luck mate. Let us know if it was successfulsmile
[+] 1 user says Thank You to diagso for this post
03-07-2022, 09:25 AM,
Post: #7
RE: E70 CCC update failed with ISTA-P and ICOM A+B
Thank you !!!!
Back to life !

Edit : I did a full ISTA+ check of the car and tested all MOST loop with it. All communication is OK, all MOST componant answered...

It is probably my China B clone (with orange cap)


Attached Files Thumbnail(s)
   


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Esys error message only on EPS. ''Failed to get CAFs for SWE'' arthur101 2 71 4 hours ago
Last Post: arthur101
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 97 11,502 Yesterday, 11:38 AM
Last Post: vld
  ista 4.46 Standalone kiranabc 76 10,206 Yesterday, 08:46 AM
Last Post: kiranabc
XZBMW ISTA 4.47.1x I-LEVEL+OVERVIEW AutoExe3219 0 198 24-04-2024, 22:52 PM
Last Post: AutoExe3219
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,707 662,235 24-04-2024, 14:22 PM
Last Post: Sedoy
XZBMW ISTA+ 4.47.1x Install Files - MEGA shawnsheridan 11 1,094 24-04-2024, 04:47 AM
Last Post: ctgy8923
XZBMW NBT EVO Connected Drive problem after update I-Level SkeYT 47 4,704 22-04-2024, 11:44 AM
Last Post: kwat
XZBMW [MEGA] ISTA 4.32 // ISTA-P 3.72 + ALL LOADER up to 6.6 // no license needed hashtagmaster 61 18,350 21-04-2024, 22:17 PM
Last Post: grizzle
XZBMW ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40 maksymw 3 977 21-04-2024, 12:02 PM
Last Post: matigdy
XZBMW Update ISTA 4.39.20 SQLiteDBs Italian Language diman64 10 995 20-04-2024, 11:20 AM
Last Post: elettra19

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content