Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
AGR Fresh rate with the lasted I-Step
05-07-2022, 19:16 PM,
Post: #1
|
|||
|
|||
AGR Fresh rate with the lasted I-Step
Hi,
Does anyone already know whether the increase in the EGR fresh air rate still works with the new I-stage F020-22-03-552 ?? Best Regards |
|||
06-07-2022, 05:22 AM,
Post: #2
|
|||
|
|||
RE: AGR Fresh rate with the lasted I-Step
(05-07-2022, 19:16 PM)Striker1905 Wrote: Hi, Can you explain what real life benefits did you get from doing it? EntryNav2, MGU, Evo - carplay with or without ATM, full fsc, component protection and more.
NCD 2.0 secure coding - typeschlussel (typecode) change, region change Press rep & thanks if I you found this useful. PM if you need more help. |
|||
06-07-2022, 14:50 PM,
Post: #3
|
|||
|
|||
RE: AGR Fresh rate with the lasted I-Step
Then I'll explain briefly..
in principle, the EGR fresh air rate is about avoiding or reducing sooting in the intake tract. So we increase the value in the control unit, which means that we suck in more fresh air instead of exhaust gases from the EGR. Here are some real examples By the way, this change is purely about the diesel engines. measured on a B47 2.0 diesel Code: Massairflowmeter: These are not huge jumps but I would say better than nothing.. In this case, the engine control unit is from BOSCH and these are unlocked up to an increase of 60mg and my question was whether in the latest I Step these might have been completely banned or not. Best Regards |
|||
Reputation: +1 - jb2005 [+1] | |||
07-07-2022, 11:04 AM,
Post: #4
|
|||
|
|||
RE: AGR Fresh rate with the lasted I-Step
how to do it with tool32 ?
|
|||
07-07-2022, 14:12 PM,
Post: #5
|
|||
|
|||
RE: AGR Fresh rate with the lasted I-Step
(07-07-2022, 11:04 AM)Jalami Wrote: how to do it with tool32 ? yes with tool32 I see it coming, at the end I'll explain how to do this action |
|||
07-07-2022, 19:36 PM,
Post: #6
|
|||
|
|||
RE: AGR Fresh rate with the lasted I-Step
which parameter is responsible for this?
|
|||
07-07-2022, 20:12 PM,
Post: #7
|
|||
|
|||
RE: AGR Fresh rate with the lasted I-Step
You can use this little Tool. You need same things installed like for tool32. Handling is much better as tool32.
|