[zhw118511]

The data update is very easy to use. Thank you

[gyozo75]

Hi.
ODIS-Service_7.2.1-EU_Postsetup_70201.101.1660_test,working fine as other modified postsetups.
Car tested Skoda Karoq 2019,DDY Engine,Online coding ABS module.
Good luck!
Thank's.

[pendragon1]

tested 1660 with VW Golf 5, all works fine
many thanks to Tadk!!!

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.1690_test ( 17,42 Gb )


Update 70201.101.1660-to-70201.101.1690 ( 1022,4 Mb )

TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 9.1.0, Postsetup 90100.207.570.

Don't spam thread and PM (Private Message) me for password.


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980


Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[pendragon1]

tested 1690 with AUDI A3, all works fine
many thanks to Tadk!!!

[DasXardas]

Please can you provide to me some step-by-step guide how to install this version? I installed ODIS-E 7.2.1 with your postsetup, but I cannot see vas5054a device in the list. I'm sure that I'm doing something wrong. Is necessary to install 6.x version first or how to do that? Thank you for any help.

[Tadk]

Please can you provide to me some step-by-step guide how to install this version? I installed ODIS-E 7.2.1 with your postsetup, but I cannot see vas5054a device in the list. I'm sure that I'm doing something wrong. Is necessary to install 6.x version first or how to do that? Thank you for any help.

using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1

[DasXardas]

Please can you provide to me some step-by-step guide how to install this version? I installed ODIS-E 7.2.1 with your postsetup, but I cannot see vas5054a device in the list. I'm sure that I'm doing something wrong. Is necessary to install 6.x version first or how to do that? Thank you for any help.

using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1

I try that, and let you know. Thank you.

[DasXardas]

So I installed it successfully, It runs, I also see my VAS5054A in the device list, but ODIS spamming that this diagnostic interface is not supported. If I click OK it repeats again after few seconds.

[Tadk]

So I installed it successfully, It runs, I also see my VAS5054A in the device list, but ODIS spamming that this diagnostic interface is not supported. If I click OK it repeats again after few seconds.

did you replace all the files in the plugins folder?