[vagvag]

With PS 1690 and VW Amarok 2017 3.0 TDI V6 all ok.........

Thank you Tadk m8 as always for your value help and support!!!!!!
Regarts........

[galiano]

Testet PS 1690 with Skoda Oci 4, everything works fine. Thank you.

[billyleon]

Hi member's!! I try today with 8.2.0 and moded last update by tadk To ID.4 all its ok!! with VAS 6154 CLONE.

[Jacce75]

1690 tested on
- AUDI A8 (4E_) 4.2 quattro 2003 BFM. All good.

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.1750_test ( 17,67 Gb )


Update 70201.101.1690-to-70201.101.1750 ( 1,59 Gb )

TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 9.1.0, Postsetup 90100.207.630.

Don't spam thread and PM (Private Message) me for password.


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980


Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[Tadk]

Update_ODIS-Service_8.2.0-EU_Postsetup_80200.101.580_test ( 17,64 Gb )


TEST! No guarantee!

Updates are from version 9.1.0, Postsetup 90100.207.630

Don't spam thread and PM (Private Message) me for password.

[Clarence Worley]

Postsetup 1690
key customization on T6 2018 without problems

[Tadk]

Update 70201.101.1750-to-70201.101.1760 ( 4,9 MB )

TEST! No guarantee!


For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 9.1.0, Postsetup 90100.207.640.

Don't spam thread and PM (Private Message) me for password.

[pendragon1]

tested 1750 with VW Golf 5, all works fine

many thanks to Tadk!!!

[Tadk]

Update 80200.101.580-to-80200.101.590 ( 4,8 MB )


TEST! No guarantee!

Updates are from version 9.1.0, Postsetup 90100.207.640

Don't spam thread and PM (Private Message) me for password.