Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Mini F56 install new BDC, terminal 15 locked
20-09-2022, 18:02 PM,
Post: #1
|
|||
|
|||
Mini F56 install new BDC, terminal 15 locked
Hello,
I have installed a new BDC in a 2016 F56. From the old BDC I could still read out FA and have imported into the new BDC. After I have coded, unfortunately nothing works. Ignition does not turn on. When I read out the car with ESYS I get to see only BDC_BODY and BDC_GW. With ISTA I get a lot of errors. I noticed especially the error: Electric steering lock (ELV). With ISTA I get it but unfortunately not unlocked. Thanks for your help |
|||
20-09-2022, 18:57 PM,
Post: #2
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
You need to perform BDC replacement procedure using ISTA. Was your BDC new from dealer?
|
|||
20-09-2022, 19:25 PM,
Post: #3
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
yes, BDC is new from dealer.
Can I still do this nit ISTA? before I coded with ESYS, strang the car. |
|||
20-09-2022, 19:36 PM,
Post: #4
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
Can you write with esys svt, fa and istep shipment to bdc
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
20-09-2022, 19:43 PM,
Post: #5
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
yes, that works.
I have reflashed BDC_GW |
|||
20-09-2022, 19:51 PM,
Post: #6
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
And still nothing there just bdc_body and gw
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
20-09-2022, 19:57 PM,
Post: #7
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
some control units are seen, but nothing turns on.
when I connect the car with ENET, only BDC is visible |
|||
20-09-2022, 19:59 PM,
Post: #8
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
Open all port on flexray with tool32 and reset
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
20-09-2022, 20:10 PM,
Post: #9
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
could you please tell me how to do this?
Toll32 I have and it works Thank you |
|||
20-09-2022, 20:12 PM,
Post: #10
|
|||
|
|||
RE: Mini F56 install new BDC, terminal 15 locked
Does the elv function? ie is the steering lock on/off? Usually with new bdc t15 is active when installed so if you coded bdc but elv doesnt function then you wont be able to switch t15 on
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content