Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO dead after running feature installer
27-09-2022, 21:58 PM,
Post: #1
|
|||
|
|||
NBT EVO dead after running feature installer
I am Retrofitting a g series NBT evo into F series. I was able to flash the unit successfully however it VO locked. So I ran feature installer with full fsc, FS CarPlay, VO unlock, and remove CP.
Feature installer finished with error. I know can’t see it in Esys or any other application. I also can’t ping the unit. I am afraid it’s dead. I do have vvdi prog so I can BDM read/write if someone can help repair. Or any other ideas? |
|||
28-09-2022, 00:59 AM,
Post: #2
|
|||
|
|||
RE: NBT EVO dead after running feature installer
Why was the REMOVE CP necessary?
You did all of that using one feature code? |
|||
28-09-2022, 02:03 AM,
Post: #3
|
|||
|
|||
RE: NBT EVO dead after running feature installer
|
|||
28-09-2022, 03:39 AM,
Post: #4
|
|||
|
|||
RE: NBT EVO dead after running feature installer
Okay, you live dangerously, not sure.
|
|||
28-09-2022, 04:10 AM,
Post: #5
|
|||
|
|||
RE: NBT EVO dead after running feature installer
It looks like bricked unit. It can be recovered only by reprogramming MCU on bench.
EntryNav2, MGU, Evo - carplay with or without ATM, full fsc, component protection and more.
NCD 2.0 secure coding - typeschlussel (typecode) change, region change Press rep & thanks if I you found this useful. PM if you need more help. |
|||
Reputation: +1 - egoy936 [+1] | |||
28-09-2022, 08:36 AM,
Post: #6
|
|||
|
|||
RE: NBT EVO dead after running feature installer
|
|||
28-09-2022, 14:39 PM,
Post: #7
|
|||
|
|||
RE: NBT EVO dead after running feature installer
Bump! Can anyone help repair this? I have vvdi
|
|||
29-09-2022, 15:43 PM,
Post: #8
|
|||
|
|||
RE: NBT EVO dead after running feature installer
PM me, i can repair
|
|||
Reputation: +1 - egoy936 [+1] | |||
18-10-2022, 13:52 PM,
Post: #9
|
|||
|
|||
RE: NBT EVO dead after running feature installer
You have to do Tal-Processing on bench and need SWT packs
|
|||
18-10-2022, 16:03 PM,
Post: #10
|
|||
|
|||
RE: NBT EVO dead after running feature installer
for the future: you NEVER use everything in one code, just don't be lazy and use different codes for every action. if you bought it from someone and didn't create it your self, you should consider changing your provider.
MGU Patching/Virginizing.
Feature Installer codes. Physical NBT EVO Repairs. CarPlay activations. Remote BMW Coding. [email protected] |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content