[mm04kk]

Hy, i have updated my ista to 4.32.15 because old version was not connecting to G series cars e and f was no problem Kl.15 shows allways 0 volt . But with new ista i have same problem does anyone know how to fix this problem

Thank you in advance


edit i have bridged now pin1 to pin 16 now kl15 shows voltage and ista is reading . Does anyone know how to fix the icom to get it working original

[BMWzone]

Usually in this version on Gxx series don’t works every ABL test, show error, but connect and diagnostics Gxx cars

[willisodhiambo]

What icom is this. A2 clone?

[mm04kk]

Its the expensive version with wifi not the cheap one . Before 2 years i have bought the cheap one but he worked only 1 time and then it was dead . The expensive one work now for 2 years without any problems in e and f serie.

Anyhow the problem is solved now i have used yesterday my enet cable and ista has read the car without problems and much more faster than the icom.

[pereq]

Use enet cable, you need to change connection settings

[torchia]

have you flashed the icom with new firmware? i have 8 years old com clone and works fine with 4.33. takes a bit longer to show up

[antoniocecere]

have you flashed the icom with new firmware? i have 8 years old com clone and works fine with 4.33. takes a bit longer to show up

  Good morning torchia have you flashed the icom with new firmware Which version?