[RallyeCAV606]

Hello,


I have a 2006 Passat with 1.6FSi BLF engine. CCM 3C0959433K

I had fault codes about ELV so I bought a new from dealer and with ODIS and online try to adapt. When I first push switch ignition turned ON and start procedure. In progress ODIS ask for ign OFF and ON after that NO ignition switch ON again

Also I jump ignition relay and done diagnostic again and have NO communication with CCM or anything on convenience CAN-bus like doors,radio,steering electronics. 

I believe that CCM dump must become corrupted.  Is it possible to check and repair dump?

attached is a Dump reading and text file of immo data decoded  with KSG/CCM decoder

Immo.rar
File Type:
Downloaded:	11 times
Size:	1,023 bytes

[jokir]

Test and report

[RallyeCAV606]

Test and report

Check that nothingI unlocked the ELV and get ignition ON but unfortunately I also have security code lock 255 can this be reset. Or my only hope is to wait?