Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
code amplifier 688 for use as 677 F10/F11 pre-lci
02-04-2019, 18:31 PM,
Post: #1
|
|||
|
|||
code amplifier 688 for use as 677 F10/F11 pre-lci
Is it possible to code a HK amplifier option code 688 (hk surround system) as 677 (top hifi logic7) for use on a F10/F11 03/2011 pre-lci with cic prof?
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
02-04-2019, 19:20 PM,
Post: #2
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
you have to specify which HK amp you are talking about ( part number is very useful info to provide ) , if its with MOST connection then easy job , but some HK amps don't use MOST , it uses CAN signal to operate .
|
|||
02-04-2019, 19:32 PM,
Post: #3
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
p/n: 6512 9393181
The amplifier uses most. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
02-04-2019, 19:42 PM,
(This post was last modified: 02-04-2019, 19:43 PM by emhtuning.)
Post: #4
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
(02-04-2019, 19:32 PM)Fx82 Wrote: p/n: 6512 9393181 I have F10 Logic7 in my F31 , lets swap easy job , Code the CIC with the original FA of the car after adding ( if its not added yest ) 677 option , and you need FA from F30 to Code the amp ( VIN of amp must match the VIN of F30 FA ) . and call it a day. |
|||
02-04-2019, 20:09 PM,
(This post was last modified: 02-04-2019, 20:17 PM by DayvG.)
Post: #5
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
So in today’s trend of hijacking threads I have almost an identical question that kinda fits here . I fitted a top hifi amp from a 2013 M5 because I was retrofitting ASD. The model of AMP I had was 688 HK and the M5 amp was 677 top hifi. It lists these in the ETK. Esys and ISTA always show that I need to deinstall the AMPT and install AMP_TOP.HB I am assuming I can’t flash the AMPT with AMP_TOPHB? The worry I have is that the flash will fail or won’t have the ASD function? I would just leave it but the red showing in ESYS troubles me.
PN 9296117 I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
02-04-2019, 20:32 PM,
Post: #6
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
(02-04-2019, 20:09 PM)DayvG Wrote: So in today’s trend of hijacking threads I have almost an identical question that kinda fits here . I fitted a top hifi amp from a 2013 M5 because I was retrofitting ASD. The model of AMP I had was 688 HK and the M5 amp was 677 top hifi. It lists these in the ETK. Esys and ISTA always show that I need to deinstall the AMPT and install AMP_TOP.HB I am assuming I can’t flash the AMPT with AMP_TOPHB? The worry I have is that the flash will fail or won’t have the ASD function? I would just leave it but the red showing in ESYS troubles me. just leave it as is , you will not be able to flash it with any other software from different hardware . if Esys is bothering you , best solution is :: PRESS THE X ON THE TOP RIGHT CORNER OF ESYS WINDOW . |
|||
02-04-2019, 20:35 PM,
Post: #7
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
Haha, I guess that’s what I’ll have to do. At least I know for sure it’s physically different hardware. I haven’t noticed any difference in sound quality so I’ll just put up with it.
I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
03-04-2019, 07:48 AM,
Post: #8
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
(02-04-2019, 19:32 PM)Fx82 Wrote: p/n: 6512 9393181 ma apologies for misleading information I have posted earlier ,, I was lazy to look at ETK , I only looked for a picture of the amp to see the ports .. now after looking at ETK , this part number actually is perfect match for F10 HK 688 option . so basically remove the old VO of the sound system ( 676 in your case ) , add 688 to the FA ,, and code at least CIC and amp ( maybe KOMBI too ) . |
|||
23-10-2022, 08:06 AM,
Post: #9
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
(03-04-2019, 07:48 AM)emhtuning Wrote:hello I have 2 versions of amplifier in esys when I give calculation svt. My car didn't have a Harman Kardon and I retrofitted it. The reference of the amplifier is with asd that my car doesn't have that option either. The amp comes from a bmw 435d and my 420d car. What could I do? I have seen that you had the same problem(02-04-2019, 19:32 PM)Fx82 Wrote: p/n: 6512 9393181 |
|||
23-10-2022, 08:13 AM,
Post: #10
|
|||
|
|||
RE: code amplifier 688 for use as 677 F10/F11 pre-lci
Modify FA to match Amplifer. Then calculate Svt, tal and flash
- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- FSC 1AA002 OEM for remove component protection MGU18/21 (only case BDC replace). - ID8.5 (SFA) conversion/ change region map. - Virgin Kafas4, MRR, RAM used. - Mgu patch, fsc custom match to vin, remove CP. - Reset ISN 7DTC, 8HP for F, G serie (include EGS7). - Write ISN MG1/MD1 with remotely. - Carplay/Android Auto MGU with/without ATM (6AE). Skype live:laquangksxd |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW Navigation Maps FSC activation code (request) | rogerkj71 | 85 | 11,655 |
1 hour ago Last Post: sww.diag |
|
REQUEST FSC CODE | muskatas | 4,306 | 365,664 |
Yesterday, 12:12 PM Last Post: Raimo5 |
|
DDE509 Internal fault 7 code 4703 | GoNz0- | 1 | 138 |
30-04-2024, 19:37 PM Last Post: gabur431 |
|
FSC Code for Route Maps | Bimmer540 | 236 | 34,801 |
15-04-2024, 12:50 PM Last Post: energjia |
|
Mini Tooth to mechanical code | koziol | 0 | 101 |
14-04-2024, 14:27 PM Last Post: koziol |
|
Will F10 Harman Kardon amplifier fit F3x? | makkan00 | 4 | 209 |
13-04-2024, 11:40 AM Last Post: sebastianfernandes |
|
VO code RSE_HIGH_NBT2 error | HU_man | 3 | 174 |
12-04-2024, 07:08 AM Last Post: Node |
|
G05 KAFAS4 enable code missing after Retrofit ACC | 6ergsm | 19 | 2,551 |
26-03-2024, 12:33 PM Last Post: Hodgsonp |
|
How to change VIN code in VCM via Esys? | vipsha | 5 | 1,517 |
14-03-2024, 22:20 PM Last Post: tcp443 |
|
Bmw ENBT evo e92 b&o amplifier Retrofit and ASD | ruben_17non | 8 | 443 |
10-03-2024, 08:01 AM Last Post: ruben_17non |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content