[ricarpa]

Hi, it turns out that I have installed EDC in my BMW F26. It turns out that when connecting the ECU VDC1, Esys does not detect it to inject CAFD and thus code with VO 223. I have changed the modil for another and it does not appear in the ESYS unit tree. I have checked the installation and everything is correct. They have told me that it may be because the ECU port does not communicate well with Esys. If this were the case, how could I check and/or change it? Could someone please help me on this? Thank you very much

[LeonidLunin]

Flexray........................

[ruben_17non]

FLEXRELAY initialitation
you remplace ICM?

[ricarpa]

FLEXRELAY initialitation
you remplace ICM?

Is it necessary to replace the icm module? I have not replaced that module. 
My car has driving assistant plus and I think the icm module is edc compatible
How is flexrelay initialized?

Thank you

[ricarpa]

FLEXRELAY initialitation
you remplace ICM?

Is it necessary to replace the icm module? I have not replaced that module. 
My car has driving assistant plus and I think the icm module is edc compatible
How is flexrelay initialized?

Thank you

I am going to answer myself because I have already solved the problem. It turns out that the ZGW module has closed ports and the pins where the VCD1 ECU is connected were closed, well with the ediabas Tool 32 program I managed to open all the ports and finally Esys recognized the module. I was able to code and everything perfect. Attached photos. Thank you very much to all of you who have helped me.