[zapdus]

Hi

Im working on Nissan Cabstar 3.0 DCI 130hp with bosch edc17c45

ECU Hardware version: 23710LE00C
ECU Software version: 23710LE12B
Bosch Software version: 1037555577 

I tested several solution but I have DTC and MIL on

I try to run dpf, egr and adblue off

My problem is adblue solution, car was running with empty dpf and adblue DTC, but no limp mode

After driving car with bad solution 2-3 days I now have limp mode, if I load original file I have DPF DTC, P24A4 DPF Full, cant erase ths DTC and car is in limp mode but even slower
Before DPF DTC car was running fine, no limp mode

Do I need to reset DPF? What tool to use?

When I write my solution DPF, EGR and ADBLUE, I only have ADBLUE DTC
If I disconnect ECU adblue, DTC U0029 (CAN fault) appears and the car is in limp mode
If I connect adblue ECU the car shows DTCs P208A and limp mode too
Do I need to leave adblue ECU connected or disconnected??

[youcef1234]

hi
try and report AD-BLUE+Dpf+Egr-Off
Pass: Pm

[zapdus]

hi
try and report AD-BLUE+Dpf+Egr-Off
Pass: Pm

Thanks for help but still not working
Adblue connected I have P208A and cant erase

Adblue disconnected I have U0029 and cant erase
Car rpm max 1900

[youcef1234]

hi
Ad-blue+dtc-OFF
pass: pm

[zapdus]

hi
Ad-blue+dtc-OFF
pass: pm

Sorry I didnt test
This truck tilted me and I sent truck to another garage, they solved it !!