[stecom90]

Hello CT members,

Need help to flash TV module.
It works well, flash needed to resolve channels memories.
Car : F13 2013 with EVO/ATM
TV module 6836347 (donor G30 VIN G472609 10/2015)

Used e-sys 3.38 full psdz, CODE ok, read/modify CAFD ok.
First time, green recycle icon next to ecu, find right istep shipment to have black HWEL (F10 15 07 500)
But I can't flash the module, something is wrong. Can you help me ?

[user_530d]

Here is your TAL for flashing the TV-Module. 
Don't load any SVT under SVT_SOLL in TAL Execution this is unnecessary.

[stecom90]

There is always a mistake

[user_530d]

In TAL processing read out your VO and dont use saved VO.
My suggestion is ESYS 3.31, this is the best version for flashing. Can you install in parallel, create a new folder like 3.31 during installation.
Your version has problem i think.

[stecom90]

Hi,
Tried with 3.31.0 and other version, same error.
May be is this :
[TV_MODUL - 4B] ECUId:TV_MODUL_0x4B not accessible cause could not be switched to parallel programming mode [THROWABLE]
If you have any idea....

[user_530d]

Ohh shit. This fail is my mistake. TAL need also NBT device, TV-Modul is MOST connected. I edit the TAL…mom.

---

@stecom90


Add new TAL version

[stecom90]

It's still not ok. Tested a lot of configurations, different soll/tal, w/o svt target, several versions of esys, connect. URL/VIN, ... the problem is always the same.

Nothing to do with Black/White list in TAL-Process. parameters ?
Do I need an icom, bench ? or my psdz are corrupted?

(No launcher, ENET)

Code:

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2023/01/27-23:32:59.494
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[] prepareVehicleForFlash finished [PROGRESS]
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
MCDDiagService<id=242900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=RC_SDB - RoutineControl SetDefaultBus, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[] Activate programming mode was not successful for: ECUId:HU_NBT2_0x63 [WARN]
[TV_MODUL - 4B] ECUId:TV_MODUL_0x4B not accessible cause could not be switched to parallel programming mode [THROWABLE]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "2min 29s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2023/01/27-23:49:34.880
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[] prepareVehicleForFlash finished [PROGRESS]
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
MCDDiagService<id=242900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=RC_SDB - RoutineControl SetDefaultBus, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[] Activate programming mode was not successful for: ECUId:HU_NBT2_0x63 [WARN]
[TV_MODUL - 4B] ECUId:TV_MODUL_0x4B not accessible cause could not be switched to parallel programming mode [THROWABLE]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "3min 1s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

[user_530d]

TV-Modul is connected over MOST as slave and NBT is MOST-Master. Way for programming is ENET>ZGW>NBT>TV
NBT goes not correct in programming mode and from this no connection to TV-Modul. This is your error.
In log are no errors from data.

[rocdeng]

Hi,
Tried with 3.31.0 and other version, same error.
May be is this :
[TV_MODUL - 4B] ECUId:TV_MODUL_0x4B not accessible cause could not be switched to parallel programming mode [THROWABLE]
If you have any idea....

Did you try to uncheck the 'Parallel Programming' checkbox in the TAL->Parameters->Parallel Programming?

[stecom90]

I'll try to uncheck the 'Parallel Programming', and with specific FA EVO (same VIN)