[mactronic]

2310 tested on


Seat Ibiza 6J CGGB 1.4 l MPI 63 kW EU5 - OK

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.2490_test ( 16,67 Gb )


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 11.0, Postsetup 110000.301.360.

Don't spam thread and PM (Private Message) me for password.
If you want to get the password for my share you need to :
1) Have minimum reputation 25
2) To have at least 3 useful replies on previous updates that i posted until now.
3) Attach the diagnostic log to your feedback (please EDIT car's VIN number)

For those who do not have the necessary reputation, the previous version!


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980


Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[greenhorn]

2490 works like charm......tested VW37X.

[jinyouZ]

2440 works normally in 2023 TAYRON

[billyleon]

ALL ok for seat leon 2002 BCB and seat ibiza 2013 CBZB!!!!!

[Diagmaister]

I just wonder what kind of instruction is this?
Is fantomels 5054 universal patch folder not the same?
Do i need to do this if i already patched and installed with fantomels windows 10 patch for 5054a?
Thanks anyway wonderful work.. it just got me little confused.




Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[AUDIXS]

ODIS-Service 7.2.1 Postsetup 2440 (test)

Audi 2022 Q5L CN All OK

[Tadk]

Do i need to do this if i already patched and installed with fantomels windows 10 patch for  5054a?

the choice is yours, you can use any restriction bypass, but only one

[billyleon]

Golf 6 5k 1.2 CBZB all ok!!!!!

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.2510_test ( 16,77 Gb )


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 11.0, Postsetup 110000.301.380.

Don't spam thread and PM (Private Message) me for password.
If you want to get the password for my share you need to :
1) Have minimum reputation 25
2) To have at least 3 useful replies on previous updates that i posted until now.
3) Attach the diagnostic log to your feedback (please EDIT car's VIN number)

For those who do not have the necessary reputation, the previous version!


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980


Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe