Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ ISTA 4.39 no connect
17-03-2023, 23:11 PM,
Post: #1
ISTA 4.39 no connect
Hi,

I can't get ISTA 4.39 connected to the vehicle. With ICOM the set connection button is not active while it is detecting the ICOM.
When i used enet. It detect the enet and can even set the connection but get error message while trying to connect.
tried manual installation and excution get same result.
Any idea?
   
   


Attached Files Thumbnail(s)
   
18-03-2023, 07:28 AM,
Post: #2
RE: ISTA 4.39 no connect
Your ICOM is already reserved!
18-03-2023, 08:59 AM,
Post: #3
RE: ISTA 4.39 no connect
(18-03-2023, 07:28 AM)Node Wrote:  Your ICOM is already reserved!

Yes, in that screenshot but I released it and was same.
18-03-2023, 09:40 AM,
Post: #4
RE: ISTA 4.39 no connect
are you connecting to a real car or bench?


18-03-2023, 09:43 AM,
Post: #5
RE: ISTA 4.39 no connect
Does it need firmware update? Is it genuine ICOM next?
18-03-2023, 12:27 PM, (This post was last modified: 18-03-2023, 12:34 PM by alsamaraee.)
Post: #6
RE: ISTA 4.39 no connect
(18-03-2023, 09:40 AM)bmchicago Wrote:  are you connecting to a real car or bench?

I'm connectiong to the car.

(18-03-2023, 09:43 AM)bennymx Wrote:  Does it need firmware update? Is it genuine ICOM next?

It is genuine and works fine with ista 4.32 but when I updated to ista 4.37 or 4.39 neither the enet cable managed to connec nor the ICOM. With enet cable is sees the cable and can select it but error message comes up that it failed to connect.
20-03-2023, 14:24 PM,
Post: #7
RE: ISTA 4.39 no connect
(17-03-2023, 23:11 PM)alsamaraee Wrote:  Hi,

it need firmware update
20-03-2023, 15:04 PM,
Post: #8
RE: ISTA 4.39 no connect
i had to update icom before it was detected, updated from 4.22 to 4.40.21


20-03-2023, 21:05 PM,
Post: #9
RE: ISTA 4.39 no connect
i can help you remotly
22-03-2023, 07:28 AM, (This post was last modified: 22-03-2023, 07:33 AM by alsamaraee.)
Post: #10
RE: ISTA 4.39 no connect
(20-03-2023, 14:24 PM)Yah Wrote:  
(17-03-2023, 23:11 PM)alsamaraee Wrote:  Hi,

it need firmware update

It works fine on other laptop. I reinstalled ista and will try today. If you read my post, i have even problem connecting with enet.

Hi RaoulK1998,

I have proble even with enet cable. I re-installed ista and will try it.

(20-03-2023, 21:05 PM)DarkSide Wrote:  i can help you remotly

Thank you Darkside, will send you PM after I try it today. I re-installed ISTA.
Reputation: +1 - Bagum4uk [+1]


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,652 627,997 2 hours ago
Last Post: Sedoy
  ista 4.46 Standalone kiranabc 33 3,132 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 46 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 371 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,407 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,494 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 135 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 168 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 671 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,535 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content