[wojoo]

Hi,

I am looking for a newer flash for Parking AID 5QA919294A that supports the function Manoeuvre Assist. Apparently this feature has been available since version C. Can I update my driver? flashinfo says that the highest available is F but I'm afraid it will break. 
Someone help?

Adressword : 76 (Parking AID} - J446 PDC 8 Kanal
Number VAG : SW: 5QA919294A HW: 5QA919294
SW : 0038

[Tomey]

This is the flash file I have and I hope it can help you

[pupu144]

This is the flash file I have and I hope it can help you

It's the same SW he already has..

I see that people are reporting that it is possible to downgrade from F/J to C (for some apparent reason?). So I would assume that hardware is similar for the whole lineup. But there were no reports about -A index module.
There is about 90kB more data between A and F flash files.. So personally I'd still be cautious.

Of course, correct dataset file would be your next problem after successful flashing..

[wojoo]

This is the flash file I have and I hope it can help you

It's the same SW he already has..

I see that people are reporting that it is possible to downgrade from F/J to C (for some apparent reason?). So I would assume that hardware is similar for the whole lineup. But there were no reports about -A index module.
There is about 90kB more data between A and F flash files.. So personally I'd still be cautious.

Of course, correct dataset file would be your next problem after successful flashing..

I can't find anywhere on the net that someone does a higher flash.

Once I made a flash for a higher soft in the Audi A6 C6 where, unfortunately, it was damaged after the update, so I probably won't risk it and buy a used one with a higher soft number

---

The question is which one is best to buy? what software?