Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Simos 10.22A and Julie emulator
|
22-06-2023, 10:39 AM,
Post: #1
|
||||||||||
|
||||||||||
Simos 10.22A and Julie emulator
Is it possible to use Julie emulator on SIMOS 10.22A? Car is a Seat Ibiza 2013 1.2 TSI Problem with the dash board where dash does not see the key transponder. Wiring with antenna coil is OK and transponder is also OK. There is no dash available to buy for replacement. I got the IMMO data from dash with VVDI2 - VIN, CS, MAC, PIN, Power Class, VIN - VSSZZZ6JZDR110430 CS - 3E BF 0A 48 CE 3A 71 E4 AB 05 6A CC MAC - D9 7B 3C 15 PIN - 24464 POWER CLASS - 39 I have full read of the Simos 10.22A ECU using Autotuner. As I understand it has WFS5 immo system. From the dash there is only 12 byte CS but I think there should be 16 byte CS. There is a video from ECUDIAG where their emulator works in this ECU but not much info from there how and what to do. Also CARLABIMMO forum is a 0 help. Who can help with extracting full CS and MAC from this ECU to write in Julie Emulator? ECU files attached
| ||||||||||
