Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
reset coding to factory BMW f30
|
24-06-2023, 01:57 AM,
Post: #1
|
|||
|
|||
reset coding to factory BMW f30
hello,
so over the years i have coded different options on my car ('12 F30 328i) and i'm pretty sure somewhere along the line i messed one or two things up, resulting in my airbag light to stay on for Yaw rate sensor. So my question is, whats the best way to go about reseting everything back to stock factory. I did some VO coding as well (adding sport transmission). Thanks for any help in advance. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
24-06-2023, 02:16 AM,
Post: #2
|
|||
|
|||
|
RE: reset coding to factory BMW f30
Just vo code again all modules
|
|||
|
|
|
26-06-2023, 00:30 AM,
Post: #3
|
|||
|
|||
|
RE: reset coding to factory BMW f30
|
|||
|
|
|
26-06-2023, 00:50 AM,
Post: #4
|
|||
|
|||
RE: reset coding to factory BMW f30
(26-06-2023, 00:30 AM)iturboh Wrote:(24-06-2023, 02:16 AM)jaramillo Wrote: Just vo code again all modules If you didn't save your factory FA.xml, I thought there were some folks on this board that could get your factory FA file based on VIN. You can load that up in E-Sys and then VO code all modules. Another option is to use one of the various VIN decoders online and compare to your current FA option codes and adjust accordingly. Thanks
![[Image: tyl_add.png]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/tyl_add.png) + ![[Image: postbit_reputation.gif]](https://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) reputation if I helped you. |
|||
|
|
|
26-06-2023, 13:56 PM,
Post: #5
|
|||
|
|||
|
RE: reset coding to factory BMW f30
you can also restore your modified FA by checking your options online, and then removing/reverting all the changes manually in E-sys
|
|||
|
|
|
26-06-2023, 14:44 PM,
Post: #6
|
|||
|
|||
|
RE: reset coding to factory BMW f30
usually yaw rate sensor fault due to adding something with the navigation in my experience. The original coding used 2 wires for ACSM to ICM and after coding needed the 4 wire.
|
|||
|
|
|
27-06-2023, 05:14 AM,
Post: #7
|
|||
|
|||
RE: reset coding to factory BMW f30
(24-06-2023, 01:57 AM)iturboh Wrote: hello, send vin ![[Image: GIF-Bandiera-Italiana.gif]](https://i.postimg.cc/dtmdcJMn/GIF-Bandiera-Italiana.gif) |
|||
|
|
|
30-06-2023, 07:52 AM,
(This post was last modified: 30-06-2023, 08:02 AM by iturboh.)
Post: #8
|
|||
|
|||
RE: reset coding to factory BMW f30
(26-06-2023, 00:50 AM)weinerbarn Wrote:(26-06-2023, 00:30 AM)iturboh Wrote:(24-06-2023, 02:16 AM)jaramillo Wrote: Just vo code again all modules i have the factory saved somewhere, i'll try to dig that up, but if not i think i saw a thread the other night with a new tool that generates an FA based on on your options, thanks for the info (26-06-2023, 14:44 PM)bmchicago Wrote: usually yaw rate sensor fault due to adding something with the navigation in my experience. The original coding used 2 wires for ACSM to ICM and after coding needed the 4 wire. oooo good to know, i'll try reseting that one first, its so annoying and embarrasing having that damn light on lol, just gonna have to get the apple car play box and call it a day. (27-06-2023, 05:14 AM) ____ANGEL___ Wrote:(24-06-2023, 01:57 AM)iturboh Wrote: hello, will send it tomorrow/today, car is at my shop, engine and tranny are out rn. ![[Image: el18fSB]](https://imgur.com/a/el18fSB)
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
