[audi666]

Share “good” drivers if you have them.
I used Win10 Universal solution from this forum, i belive it’s Fantomel’s.

EDIT : Long story short, i don’t know how but i made it work.
Made 3-4 clean/fresh installs (of course every time i made sure that i clean very well the old files), but nothing.
Last try i installed Service, and immediately after i installed Engineering, voila, worked !
My thoughts are that Engineering succesfully installed something that Service failed every time to install.
Maybe this will help someone that will be in the same situation as me.

[wo2874222]

It runs well on my Passat, thank you

[wamba]

hi
I tested with the version 2770 on a vw tiguan 2017 . and when i want to perform the SVM function to gateway it asks for DSS access , this is not normal because on old cars it is only DMS access, who can tell me if you have had the same thing.

hi, still not solved the DSS problem with the VW brand, when I want to do a software configuration on a calculator despite the car being from 2016 or 2017, it asks me for geko DSS access.

who can tell me why?

[audi666]

That is not a problem, it is normal.

[wamba]

That is not a problem, it is normal.

yet old cars do not need DSS access

[audi666]

Yes, but you don’t work on a old car, do you ?
You work on a 2016/2017 car.

Untill 2003 you didn’t need Component Protection, after 2003 you need to remove it.
The same principle.

[thanhphan1004]

test id4 2023 work good

[ibi1961]

ODIS-Service 7.2.1 Postsetup 2870 (test) Skoda Octavia test interface passthru AVDI Did not read no skoda after manual input test complete identical to odis 1.0.01 update 05.2023, Test skoda fabia 2021 all ok, test on passat 2018 test ok receives ... thanks mister TADK
best regards ibi1961

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.2940_test ( 17,49 Gb )


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 23.0.1, Postsetup 230001.105.70.

Don't spam thread and PM (Private Message) me for password.
If you want to get the password for my share you need to :
1) Have minimum reputation 25
2) To have at least 3 useful replies on previous updates that i posted until now.
3) Attach the diagnostic log to your feedback (please EDIT car's VIN number)

For those who do not have the necessary reputation, the previous version!


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980


Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[VAGPRODRIVE]

Installed after removing OS 7.1.1. it works stably, saves protocols. I have already made a strand of 5 cars.