Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM with ESYS
11-08-2023, 23:57 PM,
Post: #1
|
|||
|
|||
ICOM with ESYS
Hi, i recently purchase a original ICOM and i try to connect to ESYS but i dont know how, i see in itool radar the ip i put this ip in ESYS but no connection i hope someone can help
|
|||
12-08-2023, 00:03 AM,
Post: #2
|
|||
|
|||
RE: ICOM with ESYS
1 Lock icom itool radar
2 Use ip shown in itool radar with esys at connection via icom/ethernet 3 Connect |
|||
12-08-2023, 03:06 AM,
Post: #3
|
|||
|
|||
RE: ICOM with ESYS
I try but no connection
|
|||
12-08-2023, 04:56 AM,
Post: #4
|
|||
|
|||
RE: ICOM with ESYS
You need to open a session in ISTA first, let it scan for faults. This opens the gateway / port. Then connect in ESYS. There is a command you can use to do this, but I just open a ISTA session then connect in ESYS.
|
|||
Reputation: +1 - kumaichi [+1] | |||
12-08-2023, 05:42 AM,
Post: #5
|
|||
|
|||
RE: ICOM with ESYS
Here is the PDF and I hope it helps.
|