Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
X-BCO from R1250 needed
16-08-2023, 12:07 PM,
Post: #1
|
|||
|
|||
X-BCO from R1250 needed
Looking for a caf from new R1250 X_BCO
I have coded my F900XR EU so, that cruising light for front and rear indicators works. But i like to have that the rear indicators also will be brighter when i brake, together with the normal Backlight in the middle, what is the main brake light and backlight I got the rear indicators work as brakelight but then the main light in the middle is always off. I like to compare my coding with a caf from newer R1250 because there it s from stock what i like to have |
|||
16-08-2023, 13:45 PM,
Post: #2
|
|||
|
|||
RE: X-BCO from R1250 needed
Try to add 5AE and 5AF (Multifunktionale Blinkleuchten) and code BCO!
Vojnó
Press Thanks and reputation if this post helped you. |
|||
16-08-2023, 21:58 PM,
Post: #3
|
|||
|
|||
RE: X-BCO from R1250 needed
Will try, the CAF simulation with 5AE 5AF, don t show other codings than i did, but lets have look
|
|||
17-08-2023, 07:44 AM,
Post: #4
|
|||
|
|||
RE: X-BCO from R1250 needed
Are you updated the BCO?
CRUISE LIGHTS in x_BCO 3001 tns_CruiseLightFunc_Active set to aktiv Vojnó
Press Thanks and reputation if this post helped you. |
|||
17-08-2023, 09:54 AM,
(This post was last modified: 17-08-2023, 10:40 AM by hulahans.)
Post: #5
|
|||
|
|||
RE: X-BCO from R1250 needed
I am always totally updtated am on 23-07-xxx with the bike and psdzdata
As i said, cruise lights worked before and was no problem, only brakinging lights together with the middle on. I have seen video from R1250 ,there the middle light is off too, but the new modells are alway on. My build level for F900Xr is 22-07-xxx maybe i have to play around to put this to 23-xxx-xxx for testing and then vo coding Coded VO now with 5AE 5AF Compared the ncd , no difference in NCD and optical So no working bkl |
|||
17-08-2023, 16:27 PM,
Post: #6
|
|||
|
|||
RE: X-BCO from R1250 needed
I understand what you're saying!
I think they can be different, because the S1000XR doesn't light up in the middle either, and there isn't even a light in the middle. For this, I think a RT or a GSA should be used as a basis! Vojnó
Press Thanks and reputation if this post helped you. |
|||
17-08-2023, 18:08 PM,
Post: #7
|
|||
|
|||
RE: X-BCO from R1250 needed
Yes its possible,i have now a r1250 caf, a lot of differences but nothing that could be a connection in my eyes.
|
|||
18-08-2023, 14:35 PM,
Post: #8
|
|||
|
|||
RE: X-BCO from R1250 needed
In the GS has anadapter cable like this!
Do you have the same cable connection? Is there a second 54II_PWM wire ("G") there, do you have one too from the bike? Vojnó
Press Thanks and reputation if this post helped you. |
|||
19-08-2023, 12:44 PM,
Post: #9
|
|||
|
|||
RE: X-BCO from R1250 needed
Sorry dont know if i have same cable connection
|
|||
20-08-2023, 09:34 AM,
Post: #10
|
|||
|
|||
RE: X-BCO from R1250 needed
(19-08-2023, 12:44 PM)hulahans Wrote: Sorry dont know if i have same cable connection This is a front "Zusatzscheinwerfer" auxiliary headlights wiring. Vojnó
Press Thanks and reputation if this post helped you. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content